NEC DSX Software Manual page 424

Walking Class of Service
4. When you see
NEW PIN ACCEPTED
[Exit]
[Exit]
To change your PIN number (if you already have one assigned):
1. Press INTERCOM and dial ##6 .
When you see
2.
ENTER PIN CODE:
• Enter your current PIN number + HOLD .
When you see
3. ENTER NEW PIN:
• Enter your new PIN number + HOLD .
• When entering your PIN number:
- CLEAR erases your entire entry.
- REDIAL backspaces over (erases) the last digit entered.
When you see
4. REENTER NEW PIN:
• Confirm your entry by reentering your new PIN number.
5. When you see
NEW PIN ACCEPTED
[Exit]
[Exit]
394 ◆ Features
Entering or Changing Your PIN Number
:
:
Select to exit PIN number programming.
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
DSX Software Manual