Activating the SmarThru E-Mail Service
If you want to send and receive e-mail messages using the SmarThru
system, you have to enable and configure the Internet Gate in the
SmarThru system as follows:
Note: To configure the Internet Gate in the SmarThru system, you must
enter your e-mail address, incoming (POP3 or IMAP4) and outgoing
(SMTP) mail server address. Ask your Internet service provider or
on-line service provider about this information.
1. Right-click on the SmarThru Mail Engine icon
bottom right corner of the desktop window, and then select
Configuration from the pop-up menu.
2. Select Internet Gate on the left of the SmarThru Configuration
window, and then select the Enable Internet Gate checkbox.
on the taskbar at the
SmarThru Mail
Engine icon.
Put a check mark
in this box.
4.3
Mailbox