Scanning to E-mail
Scanning a Document to E-mail
The Scan Wizard window contains the Scan to Email service which lets
you scan documents, and then launches the mail program currently
configured in your PC to send just scanned documents attached to an
e-mail.
If you activated the SmarThru e-mail service, the SmarThru e-mail
system runs to send the scanned documents. For details, see page 4.3.
To scan to e-mail, take the following steps:
1. Load a document(s) you want to send into your MFP.
2. Run the SmarThru 3 and then open the Scan Wizard. See page 1.4.
3. Select Scan to Email in the Scan Wizard window.
Click.
2.14
Scan Wizard