Table of Contents
Advertisement
Command Line Interface
General Setup Commands
ping <DEST IP> <OPTIONS>
Definition:
Parameter(s):
Example:
TFTP Client Setup Commands
When the user enters tftp, the screen will show all commands about the TFTP
client:
ggdbg>tftp
tftp srvip <IP ADDRESS>
tftp get <FILENAME>
tftp update
Current Settings :
TFTP Server IP Address : 172.16.6.245
Image File Name : 102nmm01.tfp
This command lets the user ping an IP address from
the device.
<DEST IP: The host ip address>
<OPTIONS, -t : Ping the specifed host until stopped
(type SPACE).
-n count: Number of echo requests to send.
-w timeout: Timeout in seconds to wait for each reply.
-i interval: The interval in half-seconds between two
echo requests.>
ping 10.1.1.6 -n 100 -w 2 -i 1
– set the IP address of TFTP server
– get the remote image file
– update the image in flash
If <FILENAME> is not specified,
the image file name in
EEPROM will be employed.
62
Advertisement
Table of Contents
