D-Link DG-102SP Manual page 60

Command Line Interface
General Setup Commands
nwdbg tftp <0|1>
Definition:
Parameter(s):
Example:
nwdbg ca <NOTIFY ENTITY>
Definition:
Parameter(s):
Example:
nwdbg rgw <RGW NAME>
Definition:
Parameter(s):
Example:
nwdbg dns <DNS IP>
Definition:
Parameter(s):
Example:
This command sets the software download link to either
a WAN link or a LAN link. If only nwdbg tftp is typed, this
command shows the download link.
<0:WAN link, 1:LAN link>
nwdbg tftp 0
This command sets the address of notify entity. If only
nwdbg ca is typed, this command shows the address.
<NOTIFY ENTITY, the format can be:
localName@[domainName|ip]:port or
[domainName|ip]:port or [domainName|ip]>
nwdbg ca 10.1.40.100:2427
This command sets the Residential Gateway Name. If
only nwdbg rgw is typed, this command shows the
RGW NAME.
<RGW NAME>
nwdbg rgw [RGW_1]
This command sets the Domain Name Server's IP address. If
only nwdbg dns is typed, this command shows the DNS IP/
STATE.
<DNS IP>
nwdbg dns 10.1.1.5
60