Access; Arp - D-Link DFL-1600 User Manual

316

Access

Displays the contents of the Access configuration section.
Syntax: access
Example:
Cmd> access
Source IP Address Access list (spoofing protection)
Rule Name
----------------- ------ ----------------- -------------
If no access rule matches, PBR rules will be used to select
a routing table to be used for reverse route lookup. If the
route lookup fails, the action will be DROP.

ARP

Displays ARP entries for the specified interface(s). Published, static as well
as dynamic items are shown.
Syntax: arp [options] <interface pattern>
Options:
- ip pattern
- hw pattern
- num n –Display only the first
- hashinfo –Display information on hash table health
- flush –Flush ARP cache of ALL interfaces
- flushif –Flush ARP cache of an iface
Example:
Cmd> arp wan
ARP cache of iface wan
Dynamic 194.2.1.1
Chapter A. Console Commands Reference
Action Iface
–Display only IP addresses matching
–Display only hardware addresses matching
= 0020:d216:5eec
D-Link Firewalls User's Guide
Source Range
pattern
n entries per iface (default: 20)
Expire=141
pattern