D-Link DSA-3100 Manual page 45

Using the Configuration Utility (continued)
Admin E-mail
Send From: Enter the E-mail
address from which you wish
to send the DSA-3100 history log.
Send To: Enter the E-mail
address here to which you wish
to send the DSA-3100 history log.
Interval: Enter the interval at
which you would like the history
to be sent.
Monitor IP List
The DSA-3100 can monitor up
to 20 IP addresses on the
network.
The system periodically sends
out packets to check the status
of the selected network devices
by pinging every 30 minutes. If
the device cannot be reached,
the DSA-3100 will send an
E-mail to the admin every 30
minutes. For example: if you
specify a device which can't be
reached, the DSA-3100 will
send an E-mail to the admin at
1:00, 1:30, 2:00, 2:30, 3:00 etc.,
until the problem is fixed.
The DSA-3100 provides 2 built-in
user accounts:
Admin: This user is the
administrator of the DSA-3100.
Manager: This user has the
right to manage a user account,
the admin functions are denied.
The Admin and the Manager
can change their passwords;
specify the current password
first. The new password must
be entered twice.
Note: If you lose the administrator's password, you can change the
administrator's password from the console interface.
Tools > Monitor IP List
Tools > Change Password
43