D-Link DSA-3100 Manual page 40

Using the Configuration Utility (continued)
To maintain an adequate level of
security, each client on the network
can be managed. To allow some
devices to be unmanaged, input their
IP addresses or MAC addresses in this
interface. Up to 20 IP addresses and
10 MAC addresses can be assigned
unmanaged access. MAC address format
is XX:XX:XX:XX:XX:XX
Caution: Allowing unmanaged access from specific IP or MAC
addresses could adversely affect the security of your network.
This feature allows you to define up to
10 virtual servers to enable access
to servers connected
authentication and local network port
from outside of the managed network.
Depending on the service provided,
the service might run on TCP ports,
UDP ports or both. Click Enable to
activate the rule. Changes to the
settings of virtual servers will take
effect immediately after you click the
Apply button.
Note: Each local server connected to the authentication port must also be allowed IP
or MAC address pass-through. Please enter its IP or MAC address via the interface
shown in the pass-through configuration screen.
Advanced > Pass-Through
Advanced > Virtual Server
to the
40