Control Module - Huawei FusionPower6000 UPS5000-H-600 kVA-FT User Manual

UPS5000-H-600 kVA-FT(M)
User Manual (FusionPower6000)
No. Indicator or Port
1 Status indicator
2 LCD
3 MUS05A (DB26)
4 GE
5 CAN
6 RS485_1
7 FE_1
8 FE_2
9 USB Host
10 SD
11 DIP switch

2.5.4 Control Module

The control module in a standard configuration contains two ECMs, one dry
contact card, and one monitoring interface card from left to right. The four cards
are hot-swappable. One subrack is reserved above the dry contact card. A
backfeed protection card or dry contact extended card can be inserted into this
subrack.
Issue 02 (2024-01-05)
Description
● Red: A critical alarm has been generated, and the buzzer sounds
continuously.
● Yellow: A minor alarm has been generated, and the buzzer
buzzes intermittently at 2 Hz.
● Green: The UPS is running properly or a warning has been
generated.
● Off: The UPS display is not powered on.
Man-machine interface
Connects to the MDU and monitoring interface card.
Network port. A shielded cable is required.
Reserved
Reserved
Reserved
Reserved
● Insert a USB flash drive to import and export configuration files,
export run logs, and upgrade software.
● iManager-M service access is supported after a 4G module is
installed on some models.
NOTE
The USB port is protected by a security mechanism. Users can export and
import data and upgrade software only after being authenticated.
Reserved
Implements specific functions by using the DIP switch and specific
buttons; and controls the CAN communication build-out resistor in
a parallel system. For details, contact technical support.
Copyright © Huawei Digital Power Technologies Co., Ltd.
2 Product Overview
35