Huawei FusionPower6000 UPS5000-H-600 kVA-FT User Manual
  1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Storage
  5. FusionPower6000
  6. User manual
Huawei FusionPower6000 UPS5000-H-600 kVA-FT User Manual

Huawei FusionPower6000 UPS5000-H-600 kVA-FT User Manual

Hide thumbs Also See for FusionPower6000 UPS5000-H-600 kVA-FT:
Table of Contents

Advertisement

Quick Links

Download this manual
UPS5000-H-600 kVA-FT(M)
User Manual (FusionPower6000)
Issue
02
Date
2024-01-05
HUAWEI DIGITAL POWER TECHNOLOGIES CO., LTD.

Advertisement

Table of Contents
loading

Related Manuals for Huawei FusionPower6000 UPS5000-H-600 kVA-FT

Summary of Contents for Huawei FusionPower6000 UPS5000-H-600 kVA-FT

  • Page 1 UPS5000-H-600 kVA-FT(M) User Manual (FusionPower6000) Issue Date 2024-01-05 HUAWEI DIGITAL POWER TECHNOLOGIES CO., LTD.
  • Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei Digital Power Technologies Co., Ltd. and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...

  • Page 3: About This Document

    Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 4 5.1.2 Initial Startup. ● Updated 7.1 UPS Maintenance facilitate check on running status. ● Deleted section "Lithium Battery Test." ● Added FAQs. 2022-05-12 This issue is the first official release. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 5: Table Of Contents

    3.1 Physical and Electrical Specifications (380 V/400 V/415 V Model)..............49 3.2 Physical and Electrical Specifications (200 V/208 V/210 V Model)..............54 3.3 Environmental Specifications............................58 3.4 Safety Compliance and EMC Specifications.........................58 4 Installation..........................60 Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 6 7.3.1.3 Performing a Capacity Test............................110 7.3.2 Downloading the Test Data............................111 8 Troubleshooting........................112 9 FAQs............................115 9.1 Transferring to Bypass Mode Manually........................115 9.2 Performing EPO...................................115 9.3 Clearing the EPO State..............................116 Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 7 UPS5000-H-600 kVA-FT(M) User Manual (FusionPower6000) Contents 9.4 Exporting Data..................................116 A Lifting Trolley........................119 B Acronyms and Abbreviations................... 121 Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 8: Safety Information

    Equipment damage due to force majeure such as earthquakes, floods, volcanic eruptions, debris flows, lightning strikes, fires, wars, armed conflicts, typhoons, hurricanes, tornadoes, and extreme weather conditions ● Operation beyond the conditions specified in this document Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 9: Personal Safety

    D ANGER During operations, use dedicated insulated tools to prevent electric shocks or short circuits. The insulation and voltage resistance must comply with local laws, regulations, standards, and specifications. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 10 – Trained personnel: personnel who are trained in technology and safety, have required experience, are aware of possible hazards on themselves in Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 11: Equipment Safety

    Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 12: Battery Safety

    Do not expose batteries at high temperatures or around heat sources, such as scorching sunlight, fire sources, transformers, and heaters. Battery overheating may cause leakage, smoke, flammable gas release, thermal runaway, fire, or explosion. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 13 . To prevent fire or equipment corrosion, ensure that flammable gases are properly exhausted. D ANGER The gases generated by a burning battery may irritate your eyes, skin, and throat. Take protective measures. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 14 WARNING After batteries are discharged, charge them in time to avoid damage due to overdischarge. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 15 Battery use scenarios are changed without prior approval from the Company. – Battery maintenance is not performed according to the instructions in the user manual, for example, failing to check battery terminals regularly. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 16 In the case of electrolyte leakage or structural deformation, contact the installer or Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 17 Inhalation: Evacuate from contaminated areas, get fresh air immediately, and seek immediate medical attention. ● Eye contact: Immediately wash your eyes with water for at least 15 minutes, do not rub your eyes, and seek immediate medical attention. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 18: Electrical Safety

    Before connecting cables, ensure that the equipment is intact. Otherwise, electric shocks or fires may occur. D ANGER Non-standard and improper operations may result in fire or electric shocks. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 19 ● Before installing power cables, check that cable labels are correct and cable terminals are insulated. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 20 ● Ensure that the protective ground point of the equipment is reliably connected to the ground screw of the metal enclosure (connection resistance: ≤ 0.1 ohms). Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 21 Do not perform any improper operations, for example, dropping cables directly from a vehicle. Otherwise, the cable performance may deteriorate due to cable damage, which affects the current-carrying capacity and temperature rise. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 22: Environmental Requirements

    Do not expose the equipment to flammable or explosive gas or smoke. Do not perform any operation on the equipment in such environments. D ANGER Do not store any flammable or explosive materials in the equipment area. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 23 ● Ensure that the ground in the installation environment is solid, free from spongy or soft soil, and not prone to subsidence. The site must not be located Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 24: Mechanical Safety

    Do not use tools that have signs of scratches or fail to pass the inspection or whose inspection validity period has expired. Ensure that the tools are secure and not overloaded. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 25 If two persons or more move a heavy object together, ensure that the object is lifted and landed simultaneously and moved at a uniform pace under the supervision of one person. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 26 Only trained and qualified personnel are allowed to work at heights. ● Do not work at heights when steel pipes are wet or other risky situations exist. After the preceding conditions no longer exist, the safety owner and Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 27 Ensure that the ladder is securely positioned and held firm. ● When climbing up the ladder, keep your body stable and your center of gravity between the side rails, and do not overreach to the sides. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 28 During hoisting, do not stand or walk under the crane or the hoisted objects. ● Do not drag steel ropes and hoisting tools or bump hoisted objects against hard objects during hoisting. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 29 To avoid short circuits or other risks, do not drill holes into buried pipes or cables. ● When drilling holes, protect the equipment from shavings. After drilling, clean up any shavings. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 30: Product Overview

    AC/210 V AC (line voltage), the power of the entire system is derated to 50%. Switch F: full configuration of switches, including configuration input and output switches Cabling T: top transfer copper bars supported Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 31: Application Scenarios

    For the three-phase four-wire model, if the mains and bypass inputs use different power sources, ensure that the neutral wires of the mains and bypass input power sources are equipotential. For example, the mains and bypass inputs are from the same transformer. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 32 Energy control modules (ECMs) on different UPSs are connected over parallel cables to synchronize UPS outputs to supply power to loads. If one UPS fails, another UPS continues supplying power to loads, which ensures system reliability. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 33 (STS) can be added to supply power to the loads. This power supply mode is the standard Bus Sync Controller (BSC) mode. The UPS systems work in inverter mode or bypass mode. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 34: Working Principle And Modes

    The power module consists of a rectifier, inverter, and DC/DC converter. The product converts inputs into pure high-quality sine wave outputs by using the high-frequency switching technology. Figure 2-5 Conceptual diagram Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 35 UPS automatically transfers to source-share mode. In this case, the UPS obtains energy from both the utility power and batteries, and the energy is converted into AC outputs by the inverter. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 36 UPS transfers from bypass mode to inverter mode. In either bypass mode or inverter mode, the rectifier is started all the time and charges batteries using DC/DC. The ECO mode delivers a high efficiency. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 37: Cabinet Description

    (3) Bypass input switch (4) Mains input switch (5) MDU (6) Surge protection box (7) Switch handle (8) Control module (9) Intelligent detection card (10) Bypass module (11) Power modules Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 38: Component Description

    It performs AC/DC or DC/DC conversion on the mains and battery inputs, and stabilizes the DC bus voltage. The inverter (DC/AC) converts the inputs into sine wave outputs. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 39 ● Off: There is no critical alarm for the inverter or rectifier, or the software is being upgraded. Table 2-5 Specifications Item Specifications Rated output capacity 100 kVA/100 kW Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 40: Bypass Module

    ● Blinking at intervals of 0.25s (on for 0.125s and then off for 0.125s): The bypass is not configured or the software is being upgraded. ● Off: The bypass software is being upgraded. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 41: Mdu

    UPS information and parameters on the LCD. The MDU allows you to control UPS operations, view the running status and alarms, and set parameters. Figure 2-10 Appearance Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 42: Control Module

    The four cards are hot-swappable. One subrack is reserved above the dry contact card. A backfeed protection card or dry contact extended card can be inserted into this subrack. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 43: Ecm

    UPS systems, ensuring that multiple buses can switch between each other. ● BSC cables are hot-swappable. PARALLEL Parallel The PARALLEL port transmits parallel signals port between racks. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 44: Dry Contact Card

    ● DI ports have built-in power supplies with a maximum voltage and current of 12 V DC/16 mA. During cable connection, ensure that the voltage and current do not exceed these maximum values. Figure 2-13 Appearance Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 45 BCB box system will ● Disconnected: detect whether BCB box not the BCB is connected online. BCB_STA Port for ● Closed: BCB On monitoring the ● Open: BCB Off Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 46 Open: parallel connection ● OUT port open: scenario. The PDC output switch is ON. ● OUT port closed: The PDC output switch is OFF. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 47 ON. alarm and transfer to static ● BP port closed: bypass mode. The bypass input switch or system maintenance switch is OFF. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 48: Monitoring Interface Card

    MDU. ● The monitoring interface card provides the ambient temperature and humidity (T/H) sensor port, FE port, battery temperature monitoring port, and network management port. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 49 You are advised not to connect RS485 communications cables to multiple devices in parallel. Figure 2-14 Appearance (the COM1 port is an 8-pin RJ45 port) Figure 2-15 Appearance (the COM1 port is a 6-pin RJ11 port) Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 50 ● In a parallel system, ensure that used dry contacts properly connect to each UPS. MDU port Connects to the MUS05A (DB26) port on the MDU for power supply and communication. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 51 Twist cables to pin 1 and CAN_L pin 4 into one cable and then connect it to RS485+. Twist cables to pin 2 and pin 5 into one and then connect it to RS485–. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 52: Intelligent Detection Card

    ● Blinking at intervals of 0.25s (on for 0.125s and off for 0.125s): communication interrupted ● Steady on: An alarm is generated. ● Steady off: No alarm is generated. B-link Reserved FE_1 Reserved Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 53: Internal Switch

    FE_1 Port COM_OUT Port FE4_TX+ RS485+ FE4_TX- RS485- FE4_RX+ RS485+ RS485- FE4_RX- CANH CANL 2.5.6 Internal Switch Figure 2-18 Appearance Table 2-12 Specifications Item Specifications Frame size current 1250 A Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 54: Surge Protection Box

    ● If the three indicators are steady on, the surge protection box is working properly. ● If any of the indicators is off, the surge protection box is faulty. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 55: Internal Cabinet

    1230 mm x 724 mm x 916 mm Weight ● Internal cabinet components: ≤ 75 ● Internal cabinet components + DL terminal cables of power modules: ≤ 130 kg Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 56: Technical Specifications

    Mains Input Switch Bypass Input Switch Output Switch 690 V AC/1250 A/3P 690 V AC/1250 A/3P 690 V AC/1250 A/3P Fuse Specifications AC Input Output 1250 A/3 PCS 1250 A/3 PCS Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 57 380 V AC 400 V AC 415 V AC voltage) Rated current 912 A 866 A 835 A (capacity: 600 kVA) Power system Three-phase four-wire + PE Rated frequency 50/60 Hz Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 58 ● When the UPS works in normal mode, if the actual load rate exceeds the threshold that could trigger battery derating, an output overload alarm is generated. Nominal discharge 1330 A (480 V, forty 12 V batteries in standard configuration) current (lead-acid battery) Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 59 ● S-ECO mode: 0 ms (supported only by the three-phase four-wire model in the 380 V/400 V/415 V system) Output voltage ● Voltage imbalance: ±1% imbalance ● Phase imbalance: 120±1° (balanced load and unbalanced load) Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 60 ECO in a parallel Supported system No-load loss 4.5 kW Number of parallel A maximum of six UPSs can be connected in parallel. UPSs Power distribution TN-S, TN-C-S system Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 61: Physical And Electrical Specifications (200 V/208 V/210 V Model)

    Voltage range ● 0–30°C: not derated at 170–260 V, derated to 70% load at 170–138 V ● 30–40°C: not derated at 180–260 V, derated to 70% load at 180–138 Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 62 The mains input and bypass input share a power source (by default) or use different power sources. Overvoltage category OVC II Battery Electrical Specifications NO TICE The UPS supports the SmartLi. For details about related parameters, see the SmartLi user manual. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 63 No battery is shared by default. ● SmartLi 3.0: Battery string sharing is not supported. Charging voltage ● Equalized charging voltage: 2.35 V/cell (lead-acid battery) ● Float charging voltage: 2.25 V/cell Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 64 200%, the bypass will be shut down in 1 min, and the hardware depends on overtemperature protection. ● If the load exceeds 1000%, the bypass can keep working for 100 ms. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 65: Environmental Specifications

    IEC 62040-3.) 3.4 Safety Compliance and EMC Specifications Table 3-2 Safety certifications for the UPS5000-H-600 kVA-FT Safety Certification Standard EN 62040-1 IEC 62040-1 EN 62040-1 CQC 3108 Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 66 If a surge protection box is configured: 5 kA (common mode), criterion B Voltage dips and short interruptions (220 V AC) IEC 61000-4-11 Power frequency magnetic field IEC 61000-4-8 Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 67: Installation

    For details about the clearance requirements for installing a cabinet, see the corresponding FusionPower6000 user manual. 4.1.3 Tools The onsite operation personnel can select tools based on the site requirements. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 68 Personal Protective Equipment Safety helmet Goggles Protective shoes Reflective vest ESD gloves Insulated gloves Protective gloves Safety harness Dust mask Insulated shoes Transportation tools Lifting trolley Electric forklift Manual pallet truck Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 69 (M8/M10/M12/ M16) Adjustable torque Hammer drill Hammer drill bit Claw hammer wrench (Φ16 mm) Electric Step ladder Pliers Rubber mallet screwdriver Utility knife Marker Rivet gun Insulated ladder Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 70 Cord end terminal Heat gun Scissors pliers crimping tool Measurement Instruments Height gauge Laser locator Electroprobe Thermometer Clamp meter Soft measuring Steel measuring Square tape tape Level Laptop Level gauge Multimeter Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 71 4 Installation Network tester Phase sequence Dielectric strength Megohmmeter meter tester Machinery Small cutter Cable reel Engineering Auxiliary Materials Label Cable tie Cotton cloth Sandpaper Heat-shrink Insulation tape tubing Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 72 User Manual (FusionPower6000) 4 Installation Other Tools Electrician's knife Hacksaw Powder marker Glue gun Brush Paint brush Vacuum cleaner Flashlight Insulation pad Hole saw SPD extracting Internal resistance tool tester Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 73: Transportation, Unpacking, And Checking

    If there is any discrepancy, keep a record and contact the supplier immediately. Step 4 Remove the bolts that secure the cabinet to the pallet and move the cabinet from the pallet. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 74: Installing Cabinets, Enclosure Frames, Copper Bars, And Cables

    Step 3 Pull the marked cable out of the cabinet, cut the cable from the marked position, strip the cable, and crimp a terminal. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 75: Verifying The Installation

    Both ends of a busway and cable are cables labeled. Labels are concise and easy to understand. Cable ties Distances between cable ties are the same, and no burr exists. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 76 The dust covers on the cabinets are intact. Any damaged air filter should be replaced promptly. Do not remove the dust covers during construction or before power-on. Otherwise, the equipment may be damaged. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 77: Sealing Cabinets

    Figure 4-3 Filling a gap with sealing putty (1) Paper protective film (2) Transparent film (3) Sealing putty (with the transparent film facing upward) Step 3 Reinstall all covers. Step 4 Close the cabinet doors. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 78 Remove the cover only when the device is ready for operation. Otherwise, device faults may occur. Figure 4-4 Dust cover (1) Top dust cover (if any) (2) Rear dust cover (3) Front dust cover ----End Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 79: Single Ups Commissioning

    QF and QS1–4 in the inductor cabinet. Step 3 Turn on the upstream bypass and mains input switches. After the UPS is powered on, initialization begins. The MDU displays the initialization progress bar. ----End Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 80: Initial Startup

    ● Set Output frequency correctly. Otherwise, loads may be affected and the UPS may not work properly. ● Set all battery parameters correctly based on site requirements. Battery parameter settings are critical to battery maintenance, battery lifespan, and UPS discharge time. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 81 Step 4 After you set parameters on the Settings Wizard screen, the system displays the Bypass mode and No battery alarms, which do not need to be handled. Other alarms need to be handled. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 82: Setting Parameters For The Bcb Box

    Step 1 Choose System Info > Settings > Dry Contact Set, set MUE05A connection to Enable, and set BCB connection [OL] and Battery breaker [STA] to Enable. Figure 5-2 BCB connection settings ----End 5.3 Setting Working Modes Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 83: Setting The S-Eco Mode

    98.5% efficiency together with a higher input power factor and a lower input current THDi. When the bypass input is disconnected or the voltage is abnormal, the UPS uninterruptedly transfers to normal mode. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 84 Working mode to S-ECO. The information indicating that the UPS works in S- ECO mode is displayed on the LCD. Step 2 Set parameters. Figure 5-3 S-ECO mode parameters 1 Figure 5-4 S-ECO mode parameters 2 Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 85 >5%, > 10%, > compensation output S-ECO and Harmonic 20%, > 30% current THD compensation is set to Enable, threshold set Harmonic compensation output current THD threshold as required. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 86 If the inverter is not started, the UPS stops supplying power when the bypass is abnormal, and the system may power off. Figure 5-6 S-ECO system status (VFI) Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 87: Setting The Eco Mode

    ECO mode when the bypass input is unstable or is sensitive to load changes. ● ECO mode is not recommended when the load is less than 10%. ● Before setting ECO mode, ensure that the bypass is working properly. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 88 If the inverter is not started, the UPS stops supplying power when the bypass is abnormal, and the system may power off. Figure 5-10 System status in ECO mode ----End Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 89: Setting The Hibernation Mode

    Step 2 Set Module cycle hiber period(d) to an integer ranging from 1 to 100. The default value is 30. Figure 5-11 System settings NO TE Click Submit after setting parameters on the WebUI. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 90 WebUI: Inverter hibernation is displayed on the home page. You can choose Monitoring > Module Summary > Module N > Running Information to view the running data of the module. Figure 5-13 Inverter hibernation 1 Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 91: Starting The Inverter

    Step 2 On the displayed login screen, select a user name and enter the password. Step 3 In the displayed dialog box, tap Yes to start the inverter. ----End Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 92: Powering On Loads

    UPS. The No battery alarm on the MDU disappears. Step 2 Turn on the downstream output switch to supply power to loads. ----End Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 93: Shutting Down And Powering Off The Ups

    The Bypass mode alarm is displayed on the LCD. Figure 5-15 Normal bypass After you shut down the inverter, the UPS supplies no power if the bypass is abnormal, which causes a power failure for the loads. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 94 Figure 5-17 Turning off a switch NO TE Switches share one switch handle. Take out the handle when you operate different switches and reinstall it after the operations are complete. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 95 UPS5000-H-600 kVA-FT(M) User Manual (FusionPower6000) 5 Single UPS Commissioning Step 5 Turn off the upstream mains and bypass input switches. ----End Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 96: Parallel System Commissioning

    Loosen the captive screws on an ECM. Push the micro switch on the ejector lever. Pull the ejector lever outwards to remove the ECM from the subrack. Remove the ECM. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 97 Step 6 Remove the jumper caps from other UPSs in the same way. Step 7 Disconnect the ground cable of the ESD wrist strap, and remove the ESD wrist strap and ESD gloves. ----End Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 98: Starting A Parallel System

    0570-002 BPM unit abnormal. In this case, you need to power off the rack to clear the alarm. Figure 6-3 Schematic diagram Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 99 If a single UPS is not powered off after commissioning, verify on the monitoring screen that EPO has been activated successfully. Step 3 Install parallel cables between parallel cabinets. Figure 6-4 Control cable connections in a parallel system of four UPSs Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 100 UPSs. Battery Settings: On the LCD, choose System Info > Settings > Battery Settings. Alternatively, on the WebUI, choose Monitoring > Battery System > Running Parameter > Battery Settings. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 101 UPSs. Perform the same operations on phases B and C. Complete the measurement between every two UPSs in the parallel system. If the phase sequence is correct and the Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 102: Shutting Down And Powering Off A Parallel System

    Paral. Inv. ON on the LCD screen Common Functions. ----End 6.3 Shutting Down and Powering Off a Parallel System Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 103: Performing Epo

    Step 1 Press the EPO buttons connected to the dry contact cards on all UPSs one by one or press the general EPO button. All UPSs enter the EPO state. ----End Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 104: Routine Maintenance

    ● Check method: visual Monthly are taken in the inspection equipment room, such as ● Troubleshooting: rat guard and rat trap. Rectify the fault based on the acceptance criteria. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 105 Installation The equipment is installed ● Check method: visual Monthly properly and arranged inspection neatly, and screws are ● Troubleshooting: tightened. Rectify the fault based on the acceptance criteria. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 106 The inspection capacity through-current capacity ● Troubleshooting: After of cables is greater than the equipment is the switch specifications. powered off, replace the switches or cables. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 107 Signal cable ● The cables and ● Check method: visual Yearly insulation layer are inspection intact. ● Troubleshooting: ● Signal cable terminals Replace the cables. are securely connected. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 108 The configuration of the ● Check method: visual Quarterly settings output voltage grade, inspection frequency, number of ● Troubleshooting: batteries, and battery Correct the parameter capacity meets settings. requirements. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 109: Lead-Acid Battery Maintenance

    Actual temperature: ______ ● Check method: Monthly temperature °C (Allowed temperature: Measure using a 20°C to 30°C; hygrothermograph. recommended ● Troubleshooting: Check temperature: 25°C) that the air conditioner runs properly. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 110 Metal scrap There is no copper scrap ● Check method: visual Monthly or other conductive inspection foreign matter. ● Troubleshooting: Rectify the fault based on the acceptance criteria. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 111 The torque meets the requirements of the battery manufacturer. After checking that the battery screws meet the requirements, mark the screws for later check. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 112 ● Troubleshooting: of the battery Correct the parameter manufacturer. settings or rectify ● The battery operating battery operating temperature is lower temperature than the ambient abnormality. temperature plus 20°C. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 113 UPS. If the difference between the battery string voltage displayed on the UPS LCD and the measured value is greater than 1%, contact technical support. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 114: Testing Batteries

    7.3 Testing Batteries 7.3.1 Lead-Acid Battery Test 7.3.1.1 Performing a Forced Equalized Charging Test Context This item allows you to perform equalized charging on batteries forcibly. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 115: Performing A Shallow Discharge Test

    This item allows you to partially discharge batteries. A shallow discharge test is conducted to test the battery loop reliability and short-time discharge capacity when the batteries have not been discharged for a long time. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 116 Step 1 On the home screen of the LCD, choose System Info > Maintenance > Battery Maint. Step 2 Tap Start on the right of Shallow Dis. Test to start a shallow discharge test. Figure 7-2 Starting a shallow discharge test Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 117: Performing A Capacity Test

    Step 1 On the home screen of the LCD, choose System Info > Maintenance > Battery Maint. Step 2 Tap Start on the right of Capacity Test to start a capacity test. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 118: Downloading The Test Data

    If the UPS does not communicate with SmartLi 3.0, batteries are managed as lead-acid batteries by default and the battery information is subject to the data displayed on the SmartLi or NMS. ----End Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 119: Troubleshooting

    11.3 V/cell. For details about how to rectify common faults, see Table 8-1. If any UPS5000 & SmartLi Alarm Reference or contact unmentioned faults occur, see the technical support. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 120 The buzzer buzzes, The bypass thyristor Replace the bypass bypass is and the fault is damaged. module. abnormal indicator is on. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 121 The bypass module Reduce the load, or experiences improve ventilation. overtemperature. NO TE For details about component replacement and maintenance involved in Troubleshooting and Alarm List, consult maintenance engineers. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 122: Faqs

    ● After you press the EPO button, the UPS supplies no power, and the loads powers off. ● If the UPS is in maintenance bypass mode, the UPS still supplies power after you press the EPO button. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

  • Page 123: Clearing The Epo State

    Choose Home > Active Alarm to check that the EPO alarm has been cleared. Step 4 Start the inverter. ----End 9.4 Exporting Data Prerequisites To export data from the WebUI, you need to log in to the WebUI. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 124 Data type drop-down list box, select All, Historical Alarm, Active Alarm, Performance Data, or Operation Data. Click Export historical data and specify a path to save the exported data. Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 125 UPS5000-H-600 kVA-FT(M) User Manual (FusionPower6000) 9 FAQs Figure 9-4 Exporting historical data Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 126 You can decide whether to choose it based on site requirements. Appearance Figure A-1 Lifting trolley (1) Tabletop (2) Handle (3) Lowering switch (4) Elevating pedal (5) Foot brake Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 127 Step 3 Repeatedly step on the elevating pedal to raise the tabletop to a proper height. Step 4 Lift the lowering switch to slowly lower the tabletop to the required height. ----End Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 128 American wire gauge bus synchronization controller BCB-BOX battery circuit breaker BBB-BOX battery bus bar box Conformite Europeenne economic control operation emergency power off energy control module end of discharge Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 129 RS485 Recommended Standard state of charge static transfer switch SNMP Simple Network Management Protocol S-ECO super economy control operation Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.
  • Page 130 THDv total harmonic distortion of output voltage uninterruptible power system Universal Serial Bus VRLA valve-regulated lead- acid battery voltage frequency independent voltage frequency dependent voltage independent Issue 02 (2024-01-05) Copyright © Huawei Digital Power Technologies Co., Ltd.

This manual is also suitable for:

Fusionpower6000 ups5000-h-600 kva-ftm

Table of Contents