Mating Connectors - HP 5065A Manual

Model 5065A
Circuit Diagrams, Theory, and Maintenance
Table 1-3. Specifications
5065A
Frequency Stability:
Long term: ±1 x 10-" per month (maximum
limit of drift rate).
Short term•: for5 MHzoutput
Fractional Frequency Fluctuations Avg. Time (
T)
<7.5 x 10 40 1 ms
<1.5x 10-" 10ms
< 1.5
X
10·"
< 5x10-"
<1.6x1Q-"
<
5x 10-"
<
5
X
10-"
Calibration Accuracy: Set at
0.1 s
1
s
10s
100s
1000s
factory to ±1
x
10·" of specified time scale.
Settablllty: .±2
X
1
o-".
Time Scale: Set at factory to UTC unless specified
differently.
Tunability: Coarse Frequency Synthesizer Adjust-
ment: Range: 1000 x 10-"
Resolution:<2
x
10-s, thumbwheel adjust
Fine Frequency Magnetic Field Adjustment:
Range:
2
x
10"
9 Resolution: 2 x 10-"
Warm-up:
Within 1 x 10-
10
in 1 hour and 5 x 10-
11
in 4 hours of final frequency after 24 hours "off"
time at 25' C. Units typically warm-up to better
than ±2 parts in 10" of factory calibrated
frequency.
•DEFINITION
OF
TERMS
Short-Term Stability:
See Statistics of Atomic Frequency Standards by
David W. Allen, Proceedings of IEEE, Feb. 1966,
p. 221, and HP Application Note 116 for measure-
ment details.
Settablllty:
The degree to which an oscillator may be adjusted
to correspond with a reference. This is also
termed calibration.
OUTPUTS:
Frequencies: 5 MHz, 1 MHz, 100kHz.
Voltages Levels: >1 V rms into 50 ohms at 5 MHz,
1 MHz, 100kHz.
Conneclors: BNC Front and Rear for 5 MHz,
1 MHz, 100kHz.
Harmonic Distortion: (5 MHz, 1 MHz, 100kHz)
Down more than 40 dB from rated output
Nonharmonically Related Output: (5 MHz, 1 MHz,
100kHz) Down more than 80dB from rated output
Signal-to-Noise Rallo: For 1 and 5 MHz,>87 dB
at rated output (in a 30kHz noise bw).
ENVIRONMENTAL:
Temperature, Operating: 0' to 50' C. Frequency
change is<±4 x 10·" from frequency reference at
at 25'C.
Temperature, Nonoperating: -40' to+ 75' C.
(With Options to 50' C.)
Production Units Have Passed Type Test as Follows:
HUMIDITY: 0 to 95% relative humidity.
VIBRATION: MIL-STD-167 and MIL-E-5400,
CURVE I, with isolators.
SHOCK: MIL-T-21200, and MIL-E-5400 (30 G's).
ELECTROMAGNETIC COMPATIBILITY (EMC):
Mll-1-61810 and MIL-STD-461, Class A.
ALTITUDE: Frequency change is>5 x 10-" from 0
to 40,000 ft.
FREQUENCY STABILITY DUE TO:
Magnetic Fields:<5 x 10 _,for 1 gauss de change
or 1 gauss peak ac, 60
±
10% Hz and 400 ± 10% Hz.
Line Voltage:<4
x
10;
2
over specified Input range.
MATING CONNECTORS:
EXT DC input: HP 1251-0126 (5-contact), Cannon
MS 3106E-14S-5S (Series ME) furnished.
POWER: 115 or 230 Vac±10%, 50 to 400Hz, or
23 to30Vdc.
Approx. power required:
24Vdc
Without Options
Option 001 (Add)
Option 002 (Add)
Option 003 (Add)
35W
7.5W
ow
7.5W
115Vac
49W
10W
6W
16W
WEIGHT: Net, 341b (15,4 kg). Shipping, 511b
(23,5 kg). Option 001, add 21b (0,9 kg). Option
002, add 3.51b (1,6 kg).
WARRANTY: 1 year, except 3 years for RVFR.
1-3