Table of Contents
Advertisement
Display settings: Opens the [Display settings] window.
Use this to specify whether to display certain setting items
and buttons.
For details, see "[Display settings] Window" on page 54.
Other settings: Opens the [Other settings] window.
Configure the peak level hold condition of the AF/PEAK
level meter and the reception level units.
For details, see "[Other settings] Window" on page 57.
Startup settings: Opens the [Startup settings] window.
Use this to configure startup operations for Wireless
Studio.
For details, see "[Startup settings] Window" on page 57.
Region setting: Opens the [Region setting] window. Use
this when you want to use a receiver model from a region
other than the region selected during Wireless Studio
installation.
For details, see "[Region setting] Window" on page 58.
[About] menu
The [About] menu has the following commands:
Link to Message Log: Opens the folder in which log files
for warnings and error messages are stored. Messages that
appear in the [Message Log] tab of the sub window are
automatically saved as log files.
System version information: Opens the [System version
information] window. Displays the versions of the
receivers and RMU-01 units on the network, and the
transmitter versions received from the transmitters by the
receivers.
Version information: Indicates the version of the
Wireless Studio software.
Basic Operations
Wireless Studio operates in one of two modes, online
mode and offline mode.
Online mode
Online mode is used to enable real-time communication
between the receivers and RMU-01 units via the network,
and allow monitoring and control of the devices.
Device Detection and Monitoring (page 15)
Locate the receivers and RMU-01 units on the network, and
enable monitoring for these devices. This operation is
necessary for the pairing and device control operations that
follow.
Selecting Channel Plans (page 16)
Scan the signal environment using the channel scan
function of the receiver, and view the results while selecting
the channel plan.
Pairing Receiver Channels and Transmitters (page 18)
Pairing is necessary to enable control of the transmitters via
wireless remote control. Use the pairing wizard in Wireless
Studio to pair receivers and transmitters.
Controlling Devices (page 19)
Perform device controls from the [Property] window and the
[Property List] tab of the sub window.
Recording the Signal Environment during Operation
Record the signal levels and changes in QL for each
receiver. Warnings related to signal reception and QL will
also be recorded.
Offline mode
Offline mode is used for settings file operations (saving,
recalling, etc.), and applying the settings displayed in
Wireless Studio to all devices simultaneously.
Using Settings Files (page 21)
Setting values for receivers and transmitters can be saved
as files. You can recall previously used setting values by
opening a stored settings file and applying it to the devices.
14
r
r
r
r
(page 20)
Advertisement
Table of Contents
