Samsung HW-Q910D User Manual page 15

4. Check if the LINK LED is solid blue (connection complete)
STANDBY
LINK
STANDBY
LINK
5. If the PS-RQ910D does not connect, take the necessary steps according to the LED Indicator's status
On
LINK (Blue)
Blinking
STANDBY (Red) On
Others -
Blue is On
LED status
Connected with the Soundbar
Connection standby status
Connection failure
Errors
The LINK LED indicator stops blinking and glows a solid blue when a connection
is established between the Soundbar and the Wireless Receiver Module.
-
Check if the Soundbar is turned on
Repeat steps 3 through 4.
Check if the Soundbar is turned on
1. Press the ID SET button on the back of the Wireless
Receiver Module with a pen tip for 5~6 seconds until the
LINK LED indicator blinks (in Blue).
2. Repeat steps 3 through 4.
Contact a Samsung Service Center.
ENG - 15
Action
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3
L R
5 Sec
SURROUND SPEAKERS OUT ID SET
SPEAKER IMPEDANCE : 3
ID SET
POWER
POWER