Appendix A Racks; A.1 Rack Mounting; A.2 Rack Mounting Requirements; A.2.1 Requirements For Mounting In A Fujitsu 19-Inch Rack - Fujitsu PRIMEQUEST 2000 Series Hardware Installation Manual

Appendix A Racks

A.1 Rack Mounting

This appendix provides various information on the mounting racks for the PRIMEQUEST 2000 series and
PCI_Box.
A.1 Rack Mounting
The PRIMEQUEST 2000 series (including peripheral devices) has been developed and its operation
guaranteed with the basic assumption that it is mounted in a Fujitsu rack. For safe use of a unit mounted in a
Fujitsu rack, contact the distributor where you purchased your product, or your sales representative.
When mounting the PRIMEQUEST products in a rack manufactured by another company, customers need
to confirm on their own responsibility that the rack meets the PRIMEQUEST product specifications and
requirements.
See A.2.2 Requirements for mounting in a rack manufactured by another

A.2 Rack Mounting Requirements

This section describes rack mounting requirements.

A.2.1 Requirements for mounting in a Fujitsu 19-inch rack

This section explains the requirements for mounting in a Fujitsu 19-inch rack. For safe use of the
PRIMEQUEST 2000 series server mounted in a Fujitsu 19-inch rack, observe the mounting requirements
described below.
Recommended racks for mounting
The following table lists the recommended racks for mounting the PRIMEQUEST 2000 series server and
PCI_Box.
PRIMEQUEST 2000 series
Note
The Fujitsu 19-inch rack comes with a blank panel covering the front of each empty space that has no
mounted device.
If warm exhaust air from the device circulates to the front of the rack and reenters the device, it may cause a
temperature alarm and lead to a device failure.
Be sure to use the blank panel to cover the front of an empty space that has no mounted device.
Appendix A Racks

TABLE A.1 Recommended racks for mounting

Fujitsu 19-inch rack
Model 2742
Model 2737
Model 2724
Model 2642
Model 2624
Model 2616
PCR M1 742S
PCR M1 724S
PCR M1 642S
PCR M1 624S
PCR M1 616S
PCR M1 742A
PCR M1 724A

TABLE A.2 PRIMEQUEST 2000 series external dimensions

Model Height
438 mm (10U)
Download from Www.Somanuals.com. All Manuals Search And Download.
Depth (mm) Open area ratio
1,050 80%
1,050 80%
1,050 80%
1,050 80%
1,050 80%
1,050 75%
1,050 80%
1,050 80%
1,050 75%
1,050 75%
1,050 75%
1,050 80%
1,050 80%
Width
445 mm
35
company.
Depth
782 mm
C122-H007-01EN