Android Settings - Philips 75BDL8051C User Manual

Power Save
Mode 1 [TCP off, WOL on, auto off]
Mode 2 [TCP off, WOL on, auto on/off]
Mode 3 [TCP on, WOL off, auto on/off]
Mode 4 [TCP on, WOL off, no auto on/off]
TCP off: the monitor can't be powered on via TCP (network).
TCP on: the monitor can be powered on via TCP (network).
WOL on: the monitor can be powered on via the network
Wake On Lan feature.
Auto off: the monitor will switch off if there is no signal and
will not switch on when the signal comes back.
Auto on/off: the monitor will switch off if there is no signal
and will switch on when the signal comes back.
No auto on/off: the monitor don't switch off if there is no
signal (power on/off signal detection is deactivated)
Power save modes
Mode 1: DC off -> Power off. LED: Red.
Power Save -> Power off, LED: Red
Mode 2: DC off -> Power off, LED: Red.
Power Save -> Power Saving. LED: Orange. Can be woken
up.
Mode 3: DC off -> Back light off, LED: Red
Power Save -> Back light off, LED: Orange. Can be woken
up.
Mode 4: DC off -> Back light off, LED: Red
Power Save -> Will not enter power save mode. show "no
signal" only.
RCU Power No Signal
Button Off
Mode 1 DC OFF DC OFF
Mode 2 DC OFF when signal is back,
system wake up
Mode 3 Backlight Backlight OFF
OFF
Mode Backlight Backlight ON, show no
4 OFF signal
Following table is the action for Android board with
different power mode.
DC off/on: press power button by RC
Power mode in Mode 1/2 Mode 3/4
OSD
DC off shutdown 1. The current source APK(such
DC on Boot up
Advanced option reset
Reset all settings in the Advanced option menu to factory
preset values.
Android
board power
off
board power
off
keep power
on
keep power
on
as MediaPlayer, Broswer, PDF
or SmartCMS) will be closed.
2. Android system will go to
the default black launcher.
1. Android system reboots
1. Press [SET] or [ ] button to enter the submenu.
2. Press [ ] or [ ] button to select {Reset} and press the
[SET] button to restore settings to factory preset values.
3. Press the [EXIT] button or select {Cancel} and press the
[SET] button to cancel and then return to the previous
menu.

5.2.6. Android Settings

Pincode
Default password is 1234.
Settings
5.2.6.1. Network & Internet
Ethernet
Click the button to turn on / off the wired network, and
switch connection type to DHCP / static IP.
5.2.6.2. Signage Display
Settings -> Signage Display, to setup most features of
signage display. See below for more detailed information
about Signage Display settings.
29
75BDL8051C/86BDL8051C
Please enter the password
CANCEL CLEAR OK