Power On/Off; Turning On The Power; Turning Off The Power - Hitachi ED-D10N User Manual

Power on/off

Turning on the power

1.
Make sure that the power cord is firmly and
correctly connected to the projector and the
outlet.
2.
Make sure that the POWER indicator is
steady orange (73). Then remove the lens
cover.
3.
Press the STANDBY/ON button on the
projector or the remote control.
The projection lamp will light up and the POWER
indicator will begin blinking in green. When the power
is completely on, the indicator will stop blinking and light in steady green
(73).
To display the picture, select an input signal according to the section "Selecting an
input signal" (18).

Turning off the power

1.
Press the STANDBY/ON button on the projector or the remote control. The
message "Power off?" will appear on the screen for about 5 seconds.
2.
Press the STANDBY/ON button again while the message appears.
The projector lamp will go off, and the POWER indicator will begin blinking
in orange. Then the POWER indicator will stop blinking and light in steady
orange when the lamp cooling is complete (73).
3.
Attach the lens cover, after the POWER indicator turns in steady orange.
Do not turn the projector on for about 10 minutes or more after turning it off.
Turning the projector on again too soon could shorten the lifetime of some
consumable parts of the projector.
WARNING
not look into the lens of the projector or look inside of the projector through any
of the projector's openings.
►Do not touch around the lamp cover and the exhaust vent during use or just
after use, since it is too hot.
NOTE
• Turn the power on/off in right order. Please power on the projector
prior to the connected devices.
• This projector has the function that can make the projector automatically turn on/
off. Please refer to the DIRECT POWER ON (47) and the AUTO POWER OFF
(48) items of the OPTION menu.
• Use the shutdown switch (75) only when the projector is not turned off by
normal procedure.
►A strong light is emitted when the projector's power is on. Do
STANDBY/ON button
POWER indicator
INPUT MENU
STANDBY/ON
Power on/off
LAMP
TEMP
POWER
MY SOURCE/
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
ASPECT AUTO SEARCH BLANK
DOWN
OFF
KEYSTONE MY BUTTON MUTE
1 2
MAGNIFY FREEZE PAGE VOLUME
UP
ON
POSITION MENU
ENTER
DOWN
ESC RESET
OFF
KEYSTONE MY BUTTON
MUTE
1 2
POSITION MENU
ENTER
ESC RESET
17