Advertisement
Available languages
Available languages
@ Normal listening operation
1.
—
Turn the volume control to the minimum
level
before turning the power ON. The power indicator
lights when power is on.
. Using the SPEAKER switches select the desired
speaker system(s) or leave both switches in the
OFF position to use the headphones.
. Selectthe desired program source usingthe Input
Selector Panel. The correspondinginputindicator
lights up.
. Activate your chosen component.
Adjust your VOLUME, LOUDNESS, BASS, TRE-
BLE and BALANCE to provide the desired sound
quality.
To record from a program source
. Turn the volume control to the minimum setting
then press the power switch (to the ON position).
The power indicator lights up.
. Select the desired program source using the IN-
PUT SELECTOR PANEL. The input indicator lights
up.
. Activate the source program component.
Advance the volume control to a suitable level.
Commence recording by activating the tape deck
connected to the Tape 1 or Tape 2 jacks.
To monitor Tape 1 or Tape 2 recording, simply
press TAPE MONI 1 or TAPE MONI 2. However,
do not press both TAPE MONI switches.
NOTE: When a tape deck is connected to the unit,
via the Tape 1 jacks, pressing TAPE MONI 2 during
recording will disable monitoring of Tape 1 but will
not disrupt the recording.
If the tape deck is connected via the Tape 2 jacks,
pressing TAPE MONI 1 during recording will disrupt
recording.
@ To "DUB" a tape
Dubbing can be performed from Tape 1 to Tape 2
(one way).
1. Using the Input Selector, select TAPE MONI 1.
2. To start recording set the source tape deck to
playback and the recording tape deck to record.
The recording can be monitored through the
speakers or headphones.
< <Advantage of the Tape Moni switch Construction > >
With an equalizer connected to TAPE 1 (REC OUT-TAPE PB), equalized output can be fed
into TAPE 2 or fed to the speakers without rewiring.
For equalized output to the speakers only, set TAPE MONI 1 switch ON and leave TAPE
MONI 2 OFF. To feed equalized output into TAPE 2, set TAPE 1 MONI and TAPE 2 MONI
switches to ON. This setting also channels equalized output to the speakers.
||
Equalizer
|
IN
| OUT
Tape Deck
x
H
B
Turntable
x
Advertisement
