Motorola M68MPB916R1 User Manual page 24

HARDWARE PREPARATION AND INSTALLATION
4. Connect one end of the 01-RE90341W01 REV 0 active probe cable to
connector P6 on the MMDS control board; connect the other end to
connector J6 on the TCBe. Connect one end of the 01-RE90340W01 REV
0 active probe cable to connector P5 on the MMDS control board; connect
the other end to connector J5 on the TCBe. Secure the connector clamps
on TCBe connectors J5 and J6.
The active probe is now ready to connect to the target system (refer to the PPB
configuration guide for information on connecting the active probe to the target
system.)
Figure 2-3. Active Probe Interconnection (with Active Probe Box)
2-14
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
M68MPB16R1UM/D