Advertisement
OPERATIONS
Listening to FM or AM broadcasts.
INE
'Shiv
fe |
te
i eeaer
——e
oT
erate
j
L___|
eee
——=4
(2)
(1) Select the AUTO or MANUAL tuning.
eWhen
the auto
tuning
mode
is selected, the AUTO
TUNING indicator will now light.
(2) Use the BAND selector switch to select either the
FM or AM reception band.
¢ For FM broadcasts, the "FM"
and "MHz" indicators
will light.
¢For AM
broadcasts,
the 'AM'
and "kHz" indicators
will light.
(3) Press the — (Down) or + (Up) side of the TUNING
switch.
Auto tuning:
The tuner will automatically search for a broadcasting station,
and stop when one is found. To search for another station,
press again.
Manual tuning:
The tuning frequency will change by one step each time the
switch is pressed. Press as many times as necessary to tune in
the desired 'station.
e
[f the switch is held depressed, the reception frequency will
change continuously,
and stop when
the switch
is re-
leased.
(4) When you wish to receive a different station within
the same band, repeat step 3. To receive a station
on a different reception band, repeat steps 2 and 3.
(5) Adjust the volume and tone of the stereo amplifier.
NOTE:
When AUTO TUNING is in use, reception may not be possible over
long distances or when signals are weak. At these times MANUAL
TUNING is recommended.
PRESETTING
FM AND AM STATIONS
(2)
You can preset 12 FM and AM stations in Mode 1, and 12
station in Mode 2, which is a total of 24 stations.
(1) Use the BAND selector switch to select either the
FM or AM
reception band.
¢ For FM broadcasts, the ""FM" and "MHz" indicators
will light.
eFor AM
broadcasts,
the "AM"
and "kHz" indicators
will light.
(2) Use the TUNING switch to tune in the desired sta-
tion.
When
memorizing an FM station, either press the
FM MONO switch to forcibly memorize the station in
the monaural mode, or memorize the station in the
auto stereo mode (with FM MONO switch left in the
OFF position).
11
<ARB1160>
Advertisement
