Kenwood KR-A5050 Instruction Manual page 7

Am/fm stereo receiver
Hide thumbs Also See for KR-A5050:
Table of Contents

Advertisement

■ Connection of speakers
r
0
While pressing lever.
(D
Insert cord.
© Release lever.
• Never short-circuit the + and - speaker cords.
• If the left and right speakers are connected inversely or if the speaker cords are connected with reversed polarity, the sound becomes
unnatural with ambiguous acoustic image positioning. Be sure to connect the speakers and speaker cords correctly.
Setting the speaker IMPEDANCE SELECTOR
AorB:
LESS THAN 8C1
AandB:
AorB:
8£1 OR MORE
80 OR MORE
m
IMPEDANCE SELECTOR
When using speakers A or B separately
Speaker impedance
Selector position
40,6Q
A or B : LESS THAN 8 Cl
8a,16Q
Aor B: 8£iOR MORE
When using speakers A and B simultaneously
Speaker impedance
Selector position
s a 16 a
A and B : 8 a OR MORE
According to the impedance of the speakers used, set
the speaker IMPEDANCE SELECTOR on the rear panel
as shown in the table.
• When the IMPEDANCE SELECTOR switch is set to "A or B : 8
Cl
OR MORE", it is impossible to use A and B speakers at the same
time. Therefore, when using the speakers A and B simulta¬
neously, be sure to set the IMPEDANCE SELECTOR switch to
the "A and B : 8 £1 OR MORE" position.
• When connecting speakers and operating the speaker IMPED¬
ANCE SELECTOR, make sure the POWER switch is OFF.
FM DE-EMPHASIS / CHANNEL SPACE switch (Except
for some areas)
The FM DE-EMPHASIS / CHANNEL SPACE switch on the rear
panel is already set to the correct setting that prevails in the area
to which the unit is shipped. However, the FM DE-EMPHASIS /
CHANNEL SPACE setting may be different in some areas. In this
case, change the FM DE-EMPHASIS / CHANNEL SPACE setting
as shown in the table.
Area
CHANNEL
SPACE freq.
FM
DE-EMPHASIS
1
U.S.A., Canada,
and South Ameri¬
can countries
FM:100kHz
AM: 10kHz
75jis
2
Other countries
FM: 50kHz
:
AM: 9kHz
50ps
• When changing the setting of the FM DE-EMPHASIS /
CHANNEL SPACE switch, first disconnect the power
cord, then change the switch setting, connect the power
cord again, and turn the power on.
F^IOOkHi
AM 10kHz
1
K.R-A5G50
7

Advertisement

Table of Contents
loading

Table of Contents