Kenwood KR-A5050 Instruction Manual page 15

1 Select the source to be recorded.
• Select a source other than TAPE 1 or TAPE 2,
O Set cassette deck 1 or 2 to the record-pause
^ mode.
□
i
o
° O
°
□l-ir-i
i ji_j—i
Record-pause mode
A source can be recorded on cassette decks 1 and 2
simultaneously.
O Play the source component to be recorded, and
^ start recording it on the cassette deck.
o
Recording starts.
Note on recording
The input source cannot be changed while a cassette deck con¬
nected to this unit via the system control cord is in the record
mode. When it is required to change the input source, first stop
the cassette deck.
m iape auoDing
f Dubbing
from
TAPE
2 to
TAPE 1 1
2 Select a source other than TAPE 1.
1 TwtR_wga_ CO
CT_L I.J J_
• Select a source other than TAPE 1.
2 Set the cassette deck connected to TAPE 2 to
playback mode and start recording on the
cassette deck connected to TAPE 1.
• The sound of TAPE 2 can be heard from the speakers.
• Do not select TAPE 1 while dubbing.
V_/
-\
Dubbing from TAPE 1 to TAPE 2_
1 Press the TAPE 1 key.
2 Set the cassette deck connected to TAPE 1 to
playback mode and start recording on the
cassette deck connected to TAPE 2.
- j
Note on dubbing using double cassettedeck
For the tape-to-tape dubbing procedure using a double-cassette
deck, please read the instruction manual provided with the cas¬
sette deck.
K 5050 {En}
15