Multifunction Display - Yamaha K-1020 Owner's Manual

K-1020
YAMAHA natural SAUND STEREO CASSETTE DECK кодоо
OUTPUT LEVEL
Б к:
D ©
PHONES
Sendust З Неос
Closed Loop Qual Cepstan mechanism
MASTERMFADER |
@ EJECT Button (EJECT)
When this button is pressed, the cassette holder opens. Use when
loading and unloading cassette tapes.
Q POWER Switch (POWER)
This is push-on, push-off type power switch.
Q Cassette Holder
Holds the cassette tape.
Q MASTER FADER Control
This knob adjusts the range of the recording level set by the
PRESET REC LEVEL CONTROLS. Normally it should be set to
the 70" position.
* The MASTER FADER control will function only during the
RECORD mode.
@ RESET Button
Push the RESET button to reset the counter reading to "0.00".
(9 MEMORY Button
Push the MEMORY button when the counter is at the desired
counter reading. Push the button again to release the memory
function.
When the Memory position is set, the tape will automatically stop at
that position during «a; «ш Or Бебе рь. modes.
@ MONITOR Button
This button switches the MONITOR function between the source
and the tape. This machine is equipped with an auto monitor func-
tion, but it can be changed to manual if so desired: for example,
monitoring the just-recorded signal during tape recording.
@ MULTI FUNCTION DISPLAY
Please see page 5.
С) OUTPUT LEVEL Volume
Regulales level to the headphon jack, and line out to the amplifier.
BUHL: TR ШЕШЕ filli ERE шии Щщ ШЇ ;
553
5
i СЕРТ
бар. жары eMe Бен Bans Dore Bre Gad мы) чө бе Bad et Gane Berar
"БЕ
Ted ipm. aa Ш ООШ ded iii ШШ
' | |
& >
() Headphones Jack
When using headphones, insert the headphones plug into this Jack.
Ф OPERATION Buttons
PLAY: Press the button to start tape playback.
either the аме г ама or the e өө» button will increase the RE-
WIND or the FAST FORWARD speed, respectively. When
these are pressed simultaneously with the MUTE/SEARCH
button, it will be possible to search for the beginning of the
present or the next selection.
REC/PAUSE: Pushing this button will activate the RECORDING
STANDBY mode. Pushed during recording it will activate the
REC/PAUSE mode.
STOP: Pushing this button will stop tape travel. Pushing this button
during the RECORD mode will stop the recording.