Table of Contents
Advertisement
180'
LENS COVER
Open/close
Ring
V
Tally lamp
dights while recording
is in progress)
Shoofi.gWhileWatchi.g TheLCD Mo.itor
Before the following
steps, perform
step 1 (_
pg. 18).
ENTER RECORD-STANDBY MODE
Make sure the LCD monitor
is fully
open. 111rn the
tENS COVER
Open/Close
Ring to open the lens
cover, then
set the Power Switch
to "CAMERA"
("AUTO"
or "PRO.").
The power lamp lights and the camcorder enters the
Record-Standby mode.
The scene you are aimed at appears in the LCD
monitor, with the word "PAUSE" superimposed
upon it.
STARTSHOOTING
Tilt the LCD monitor
upward/downward
for best
viewability
(_
pg. 21) and press the Recording
Start/
Stop Button.
® " I_I_REC , ,
appears
in the LCD monitor
while
recording
is in progress.
STOP RECORDING
Press the Recording
Start/Stop
Button
again to stop
recording.
The camcorder
re-enters
the Record-Standby
mode.
NOTES:
• When
you use the LCD monitor
outdoors
in direct
sunfighL
the LCD monitor
may be difficult
to see. If this
happens,
we recommend
that you use the viewfinder
(_
pg.
J 8).
• To turn the tally lamp
offdurir
N recording,
refer to pgs.
32 and 34.
• For other notes, refer to pg. 19.
Advertisement
Table of Contents
