Table of Contents
Advertisement
Autofocus Area Display
Recording Display
Zoom Speed Display
When continuous or one-shot autofocus is used, a
bright rectangle appears in the center of the view¬
finder to denote the area covered by the autofocus
system.
• The display appears in both the recording and
pause modes.
• To cancel the display, press display button®
(ON/OFF button).
The filter display tells you the setting of the filter
selector. With the selector set to #>:- , "OUT¬
DOORS" is displayed. With the selector at
,
"INDOORS" is displayed.
• This display appears only in the pause mode.
• To cancel the display, press display button®
(ON/OFF button).
"REC" blinks during recording.
• This display shifts to the upper right corner
when a title is displayed.
When the power zoom speed is set to low, "ZOOM
L" is displayed. To switch to high speed, press the
power zoom speed button; "ZOOM IT will then be
displayed. When the recorder's VTR switch is first
set to ON, the zoom speed is automatically set to
low.
• This display appears in both the recording and
pause modes.
• To cancel the display, press display button®
(ON/OFF button).
Advertisement
Table of Contents
