Download Print this page

Yamaha 03DVEK Owner's Manual page 11

Video edit suite software

Advertisement

Available languages

Available languages

9
About the Video Edit Suite Software
Specify Input & Output Delay in Frames
In addition to samples and time, input and output delays can also be specified as frames in
quarter-frame steps. With a sampling rate of 48 kHz and the Frame Type set to DF, the delay
range is approximately six frames. See Delay Page on page 23 for more information.
When a bus out is selected, and the LONGER OUTPUT DELAY TIME option is turned on,
the OFFSET parameter appears on the CH Delay page. This parameters sets the delay for
bus outs globally, and can be used to correct the timing between audio and video. An off-
set/delay of up to four frames in single frame steps can be set.
On the Prefer. page, the LONGER OUTPUT DELAY TIME option allows you to increase
the output delay by 3,160 samples. Since the input and output delay functions share the same
memory, the maximum input delay is reduced by 3,160 samples when this option is on. See
Prefer. Page on page 22 for more information.
Pan Flip
Assigning the new PAN L-C-R Flip function to a USER DEFINE button allows you to quickly
pan from center to right, to left, to center, and so on. See User Define Page on page 25 for
more information.
Master Level Protect
Bus out and aux send master faders can be protected against accidental operation by using
the MASTER LEVEL PROTECT option on the Prefer. page. This is useful when master levels
are not adjusted regularly. See Prefer. Page on page 22 for more information.
Inputs 9-16/17-24 Swap
Analog inputs 9 to 16 and digital inputs 17 to 24 can be swapped so that the analog inputs
appears as channels 17 to 24 and the digital inputs appear as channel 9 to 16. This allows
you to control signals from the digital inputs without pressing the [MIXING LAYER] button.
The SWAP CH option is on the Prefer. page. See Prefer. Page on page 22 for more informa-
tion.
New EQ Programs
The following three programs have been added to the end of the EQ library.
80. 60 Hz hum removal
79. 50 Hz hum removal
78. High-range white noise (i.e., tape hiss) removal using LPF
After installing the Video Edit Suite software, you must initialize all memories to access the
new EQ programs. See EQ Library Page on page 26 for more information.
New Effects Programs
The following three programs have been added to the end of the effects library.
96. Echo Reverb
95. FEMALE Pitch
94. MALE Pitch
After installing the Video Edit Suite software, you must initialize all memories to access the
new effects programs. See Effects Library Page on page 26 for more information.
03D Video Edit Suite Software—Owner's Manual

Hide quick links:

Advertisement

loading