Yamaha DOM-30 Owner's Manual page 5

PLAYBACK
- Play, Pause, Rewind €: Fast Forward —
A A TE OE SES
e The DOM-30 will play the following disks:
e Yamaha Disk Orchestra Collection disks.
¢ Some Yamaha Disklavier disks (PianoSoft) - refer to the
Yamaha Disk Orchestra Collection catalogue for details.
e Disks recorded on the DOM-30.
+ Piano solo disks recorded on a Yamaha DRC-20 Disk Recorder.
6. Select the Desired Song Number
Use the NO d and > YES buttons or number buttons to select
the SONG NUMBER you want to hear. A list of available song
numbers and corresponding titles is provided with Disk Or-
chestra Collection disks.
TRACK TEMPO VOICE VOLUME BEAT
eco a | ca] a
QUANTIZE TRANSPOSE TUNE DISK MIDI
HOOD
No 4 PYES
7. Start Playback
Press the START/STOP button to begin playback.
o
START/STOP
8. Set the Volume
Make sure the Clavinova master volume control is set to ap-
propriate level (try about half way between MIN and MAX),
and set the DOM-30 MASTER VOLUME control for the
desired listening level.
MASTER VOLUME
MN a MAX
9. Cancel and Practice Keyboard Parts as Required
> o
RIGHT LEFT
' 2
Playback Procedure
1. Select the Desired Song Number
Make sure that the disk containing the song you wish to play
is properly loaded in the DOM-30 disk drive. If the SONG
SELECT display is not already showing, press the SONG
SELECT button and use the NO « and > YES buttons or
number buttons to select the song number (1—60) you wish to
play. To use the number buttons, press two buttons in sequence
to select the desired number — e.g. press "'O" and then "1" to
select song number 1 (''01''), or press "2" and then "6" to
select song number 26. You can also select "SONG ALL" by
pressing the NO « button once from the "SONG. NO 1"
display. In this case the DOM-30 will play back all songs on the
disk in sequence, and then start again from the first song.
OO 19 (soono: ]
So
O ©
When any SONG number is selected, the PLAY TRACK
QUANTIZE TRANSPOSE TUNE DISK MID:
SELECT button indicators corresponding to tracks that contain
© O
data will light, and those tracks will be automatically set to the
playback mode.
2. Turn OFF Specific Tracks if Desired
Press the PLAY TRACK SELECT buttons corresponding to
the track or tracks you want to turn OFF — the ""de-selected""
track indicators will go out. If the ORCH/3-10 button is press-
ed so that its indicator goes out, all material that was recorded
on tracks 3 through 10 will be OFF. Press the RHYTHM/15
button if you have recorded a rhythm track but do not want to
play it back (see "Recording a Rhythm Track" on page 12). In
all cases, the playback tracks can be alternately turned ON or
OFF by pressing the appropriate PLAY TRACK SELECT
button.
PLAY TRACK SELECT
o o o
RIGHT LEFT ORCH RHYTHM
CE CG
310
It is also possible to selectively turn tracks 3 through 10 off or
on. Hold down the FUNCTION button and press the ORCH/
3-10 button to call the following display.
+e)
The numbers ''3'' through ''10'' on the display are the track
numbers. An asterisk (*) in place of a track number means that
no data is recorded on that track. Use the REW <4 and P>
FF buttons to select the desired track number (the selected track
number will blink alternately with a "+" symbol), then use the
NO < or > YES button to turn the track OFF (the track
number will disappear), or ON if the track is already OFF.