Table of Contents
Advertisement
Adjusts the LCD panel's white balance.
Select the SYSTEM menu > [System] tab.
1
Select [LCD White Balance].
2
• A white screen for adjusting the white balance appears.
Turn the F1-F3 dials to adjust [R Gain], [G Gain] and [B Gain].
3
• Adjust as desired while checking the screen (adjustments are reflected on the screen).
• Press the dials to reset the values to zero.
Once the adjustment is finished, press the F4 dial ([Back]).
4
Camera Connection
Automatically register unregistered cameras, swap between camera numbers, and manage certificates.
Setting item
Auto Registration
Registered Camera List
Tally When Selected
Swap Source
Swap Destination
Swap
Initialize Reg. Info.
Group
Group Name
Setting values/description
Automatically sets up/registers detected unregistered cameras.
Displays a list of registered cameras. Example:
Camera 1 192.160.100.1
Camera 2 Serial
On, Off
Turns on the PGM tally (red) of the camera selected from [Registered Camera List],
[Swap Source] or [Swap Destination].
Camera 1 to Camera 200 (Camera 1)
Selects a source camera for swapping connection settings between camera
numbers.
Camera 1 to Camera 200 (Camera 2)
Selects the destination camera for swapping connection settings between camera
numbers.
Swaps connection settings ([Camera Connect. Details]) between camera numbers
set for [Swap Source] and [Swap Destination].
Deletes registration information of all cameras and restores the default settings.
Group 1 to Group 20 (Group 1)
Selects the camera group to be renamed.
Sets the name (up to 15 alphanumeric characters or symbols) of the camera group
selected in [Group].
Advertisement
Table of Contents
