Table of Contents
Advertisement
Installation placement
Handling
When the product is installed or moved, it must be handled by more than 2 adult persons.
- When the product is handled in an inclined state, one person should stand at the rear of
this machine to hold the protruding part of the top plate, and the other person should
grasp the opening of the drum after opening the door in the front, as shown in the
diagram. The inclination angle should not exceed 12°, and only backward inclination is
allowed, otherwise residual water may over ow.
12° at maximum
Attention
- After the handling is completed, please let this dryer stand for at least one hour
before connecting the power supply, otherwise the heat pump may be damaged.
Stacking installation
- This dryer can be stacked with selected Panasonic washing machines.
- It is necessary to assemble a Panasonic stacking kit (N-SK4) when this dryer is
stacked for use, and please contact Panasonic to purchase it if needed.
Attention
- If the Panasonic stacking kit is not installed, it is absolutely prohibited to stack the
product.
- When the product is stacked for installation, do not use the dryer on a platform
above the ground to prevent falling.
- In order to prevent excessive electric cord load from causing danger, do not use
high-power electrical appliances at the same time.
9
Backward
Forward
Panasonic dryer
Panasonic stacking kit (N-SK4)
Panasonic washing machine
Installation placement
Installation placement and product dimensions
Make sure that there is enough space for this dryer.
580（Drawer when fully pulled out）
Drawer
565
598
- Please con rm you have the required dimensions for installation.
※The width of the required space should be at least 64 cm. This dryer requires at
least 2.5 cm of clearance on the lateral sides, at least 2.5 cm on the top, and at least
5 cm on the back side, with clear space in front.
- Remember to insert the power plug into a separate home dedicated socket and
ensure that the socket is positioned in such a way that plug can be easily pulled out.
Attention
- Please install this dryer on a at and solid surface to avoid excessive vibration and
noise. When this dryer is placed on a platform above ground surface, please ensure
that it is placed rmly to prevent it from falling.
- Do not install this dryer in places where it is subject to direct sunlight or may
freeze in winter.
- Do not place carpets or other objects on the bottom of this dryer to avoid blocking
the opening of the bottom.
- Pay attention to not to let the metal parts of the dryer case contact to the metal
plates of furniture, stainless steel plates of a kitchen sink or other electrical
appliances.
- Before using this dryer, all packaging (including the foam pad under the package)
must be removed, otherwise it will cause damage during use.
- The nameplate indicates the rated power standard of this dryer.
Please con rm whether the power supply in your home meets this speci cation.
- Never insert the power plug of this dryer into an extension cord or multi-pin socket.
- That the lint trap has to be cleaned frequently, if applicable.
72
494
654
Dimension (unit: mm)
10
Advertisement
Table of Contents
