Advertisement
IMPORTANT
The mains lead on this equipment may be supplied with a moulded
plug
incorporating a fuse, the value of which is indicated on the pin face of the plug.
Should the fuse need to be replaced, anASTAor BSI approved BS 1362 fuse must
be used of the same rating. If the fuse cover is detachable never use the plug with
the cover omitted. If a replacement fuse cover is required, ensure itis of the same
colour as that visible on the pin face of the plug. Fuse covers are available from
your dealer.
|
DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable
for the power points in your home or the cable is too short to reach a power point,
then obtain an appropriate safety approved extension lead or consult your dealer.
Should it be necessary to change the mains plugs, this must be carried out by a
competent person, preferably a qualified electrician.
If there is no alternative to cutting off the mains plug, ensure that you dispose of
itimmediately, having first removed the fuse, to avoid a possible shock hazard by
inadvertent connection to the mains supply.
IMPORTANT
—
The wires in this mains lead are coloured in accordance with the following code :
Blue:
NEUTRAL
Brown:
LIVE
As these colours may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire coloured BLUE must be connected to the terminal marked with the letter
N or coloured BLUE or BLACK. The wire coloured BROWN
must be connected
to the terminal marked with the letter L or coloured BROWN
or RED.
On no account connect either of these wires to the terminal marked E or by the
earth symbol = or coloured green or green and yellow.
Advertisement
