Miele Scout RX3 Runner Operating Instructions Manual page 80

en
Problem
F 6
F 7
F 8
Resetting the error
message after fixing
the problem
80
Cause and remedy
Error "Fan motor overloaded"
 Empty and clean the dust box. Clean or replace
the exhaust filter.
Internal system error or error "Robot vacuum cleaner
outside of its permitted ambient operating temperat-
ure"
 Switch the robot vacuum cleaner off and on again
(I/0 switch).
Error "Front wheel dirty"
 Check whether the front wheel, the cover or the
slot recess have become dirty. Remove any
threads and hair, and clean the front wheel, the
cover and the recess.
You can reset the error messages described
above in the following ways
- Switch the robot vacuum cleaner off and on again
(I/0 switch).
- Press the Power button on the remote control.
- Press the  sensor in the control field of the robot
vacuum cleaner for at least three seconds.