Cleaning The Dust Box Seals - Miele Scout RX3 Runner Operating Instructions Manual

en
 Pull the bearing cover off the roller
brush and remove any threads or
hairs that have wound themselves
around the bearing.
 Refit the bearing cover, making sure it
clicks into position.
 Cut any threads or hairs that have
wound themselves around the roller
brush with a pair of scissors.
 Remove the threads and hair using
the wiper which is located on the bot-
tom of the cleaning tool.
 Hold the wiper over a bin.
 Press the button at the top of the
wiper several times until all threads
and hair have fallen out.
70
 Refit the roller brush with the bearing
cover attached. Make sure that the
side with the pointed end is inserted
into the corresponding slot.
 Carefully refit the roller brush cover
on both sides, making sure it clicks
into position.
 Refit the side brushes, see "Cleaning
the side brushes".
In order to continue to achieve the
best possible cleaning results, re-
place the roller brush with a new one
after approx. 1 year.

Cleaning the dust box seals

Clean the seals on the bottom of the
dust box as required.
 Place the robot vacuum cleaner up-
side down on a level, clean surface.
 Wipe the seals with a slightly damp
cloth to clean them.