Black & Decker BEGAS5800 Original Instructions Manual page 7

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Residual risks
Additional residual risks may arise when
using the tool which may not be included
in the enclosed safety warnings. These
risks can arise from misuse, prolonged
use etc.
Even with the application of the
relevant safety regulations and the
implementation of safety devices, certain
residual risks can not be avoided. These
include:
Injuries caused by touching any
u
moving parts.
Injuries caused by touching any hot
u
parts.
Injuries caused when changing any
u
parts or accessories.
Injuries caused by prolonged use
u
of the appliance. When using any
appliance for prolonged periods
ensure you take regular breaks.
Impairment of hearing.
u
Health hazards caused by breathing
u
dust developed when using your
tool (example:- working with wood,
especially oak, beech and MDF.)
If operating the shredder in a damp
u
location is unavoidable, use a residual
current device (RCD) with a tripping
current of not more than 30 mA.
Use of an RCD reduces the risk of
electric shock.
Never pick up or carry an appliance
u
while the motor is running.
(Original instructions)
Guard against electric shock
The appliance must be connected to
u
a socket or extension cable containing
an earth connection.
Electric safety can be further improved
u
by using a high-sensitivity (30 mA /
30 mS) residual current device (RCD).
Your appliance is designed for use on
u
AC (mains) electrical supplies only.
Do not attempt to use it on any other
supply.
Extension cables
When using the appliance outdoors,
u
only use extension cables intended for
outdoor use.
Up to 25 m 1.5 mm
u
cable can be used without loss of
power.
Always keep extension cords away
u
from moving hazardous parts to avoid
damages to the cords which can lead
to contact with live parts.
Operation
Before starting the appliance, look into
u
the feeding chamber to make certain
that it is empty.
Keep your face and body away from
u
the feed intake opening, long branches
may lash out when being pulled in by
the cutting gear. Do not allow hands or
any other part of the body or clothing
inside the feeding chamber, discharge
chute, or near any moving part.
Keep proper balance and footing at all
u
times. Do not overreach. Never stand
at a higher level than the base of the
appliance when feeding material into it.
ENGLISH
3-core extension
2
7

Advertisement

Table of Contents
loading

Table of Contents