Bosch Professional GCT 30-42 Original Instructions Manual page 14

14 | English
Resetting to Factory Settings
– Press and hold the start/stop button (3) until the LED status indicator (2)
flashes blue four times in quick succession.
Status indications
GCT 30-42: LED Meaning/cause
status indicator
(user
interface) (2)
Blue – Connection is estab-
lished
or
– Data is being transmit-
ted
Green – Connection established
– Coin cell sufficiently
charged
Yellow – Coin cell nearly empty
Red – Connection not estab-
lished
or
– Coin cell empty
Maintenance and Service
Maintenance and Cleaning
Remove any dirt using a brush or a damp cloth. Do not use any detergents or
solvents.
Changing the Coin Cell
u
Caution: The coin cell must always be replaced with a coin cell of the
same type. There is a risk of explosion.
u
Remove and dispose of drained coin cell correctly. Drained coin cell
may leak and damage the product or cause personal injury.
– Open the battery compartment cover on the rear of the Auto-Start remote
with a coin.
1 609 92A 7U1 | (30.06.2023)
Solution
–
–
Change coin cell soon
– Restart the connection
attempt
or
– Change the coin cell
Bosch Power Tools