Bosch Professional GCT 30-42 Original Instructions Manual page 13

– Secure the Auto-Start remote (1) to the cordless tool. To do so, tighten
the rubber band (5) and attach the free end to the second fastening
hook (4).
Cut the rubber band to the correct length, as necessary.
Appropriate places are those at which the cordless tool generates suffi-
cient vibration during operation. Never fasten the Auto-Start remote to
places which are required to operate the cordless tool (such as gripping
surfaces, switches, displays).
Starting operation
– Connect the GCT 30-42 Auto-Start remote to the GCA 30-42 receiver or
to the appropriate Bosch Professional dust extractor.
Read the Starting Operation and Establishing a Connection sections in the
operating instructions for the GCA 30-42 + GCT 30-42 Auto-Start system
or the dust extractor that is being used.
When changing a coin cell, the following shall apply:
– If the GCT 30-42 transmitter module was connected to the GCA 30-42 re-
ceiver module before changing the coin cell, the connection is automatic-
ally re-established after changing the coin cell.
– If the modules were not connected before replacing the coin cell, the con-
nection needs to be established.
After a reset, the Auto-Start remote and the receiver must be reconnected.
Auto Starting the Dust Extractor
– Insert the extraction hose into the dust extraction attachment of the cord-
less tool.
Vibration Detection
The GCT 30-42 transmitter module is equipped with vibration detection. If it
detects the vibrations of the activated cordless tool, the dust extractor will
switch on automatically.
If you switch off the cordless tool, the dust extractor switches off automatic-
ally after a certain run-on time.
Switching On and Off Manually
– Briefly press the start/stop button (3) on the Auto-Start remote (1).
The dust extractor switches on.
– To switch off the dust extractor, press the start/stop button (3) on the
Auto-Start remote again.
Note: If you switch off the dust extractor with the start/stop button (3) on the
Auto-Start remote, the dust extractor will automatically switch on again once
the Auto-Start remote (1) detects the vibrations of the cordless tool.
Bosch Power Tools
English |
1 609 92A 7U1 | (30.06.2023)
13