Table of Contents
Advertisement
Configuring the Terminal
Table 3-3. Terminal Configuration Menu Fields (Continued)
FIELD
AutoTerm(J)
ClearTerm(K)
InhSlfTst(L)
Esc Xfer(N)
3-12
FUNCTION
This parameter is effective only when the. key is pressed, in
Block mode.
Yes:
Insert a non-displaying terminator at the current cur-
sor position, then move the cursor back to the previous
non-displaying terminator. (Ifnone is found, the cursor
is moved to the cChome" position.)
No:
A non-displaying terminator is not inserted and the
cursor is not moved.
Default=No (Pt-to-pt)
Yes (Multipoint)
Clears, or doesn't clear, a non-displaying terminator, if the
display transfer operation is ended by encountering a non-
displaying terminator.
Yes:
clear terminator.
No:
do not clear terminator.
Default=No
Enables or disables terminal self test. When self test is dis-
abled, pressing the TERMI NAL TEST function key or issuing
an cCEc
z"
results in an error message. The datacomm and
printer tests are not affected by this field.
Yes: test disabled.
No :
test enabled.
Default=No
Enables or disables transfer of escape codes, relating to the
display and embedded in data, to an external printer, when
the data is sent to the printer. These escape codes might be
those specifying display enhancements, Format mode fields,
and alternate character sets.
Yes: Escape code transfer enabled.
No:
Escape code transfer disabled.
Default= No
Advertisement
Table of Contents
