HP 262SA Reference Manual page 134

Data Communications
Table 7-5. Multipoint Cables
13242T
13242R
13242S
13242Q
7-22
13242-60014 FIRST MULTIPOINT ASYNCHRONOUS CABLE
Connects the first terminal in a daisy chained group of multi-
point asynchronous terminals to the modem or computer
(hardwired).
Length: 1 or 10 meters (3 or 32 feet).
13242-60016 FIRST MULTIPOINT SYNCHRONOUS CABLE WITH
RECEIVE CLOCK
Connects the first terminal in a daisy chained group of multi-
point synchronous terminals to the modem or computer
(hardwired). Contains a conductor for the Receive Clock sig-
nal.
Length: 1 or 10 meters (3 or 32 feet).
13242-60015 FIRST MULTIPOINT SYNCHRONOUS CABLE WITHOUT
RECEIVE CLOCK
Same as above but without a conductor for the Receive Clock
signal.
Length: 1 or 10 meters (3 or 32 feet).
13242-60017 MULTIPOINT DAISY CHAIN
CABLE (ASYNCHRONOUS OR
SYNCHRONOUS)
Connects a terminal (other than the first one in the chain) to
the preceding and succeeding terminals. Has four connectors:
one male connector connects to the terminal, the second male
connector connects to the preceding terminal's 13242Q cable,
one female connector connects to the succeeding terminal's
13242Q cable, and the remaining female connector is called
the pass-through connector. When a terminal is disconnected
from the network,its 13232Q cable is disconnected from the
terminal and the pass-through connector is connected to the
terminal connector. This enables signals to pass through the
cable from the preceding terminal to the succeeding terminal.
Length: 1 or 10 meters (3 or 32 feet)