Advertisement
ERRATA (cont'd]
Page 6-14, Table 6-2 (cont'd):
Add the following
to the dcsniption
for the A10 assembly:
,_,
(Order the following
Service Note and resistors if the'A10
aasetibly
is kpl&d:
Service Note
11729.90001 CD9andtworesistors[8159-0005CDO].Th
S
e ervice Note will explain where the resistors
are to be installed.)
Page 6-20, Table 6-2:
MP166. Change the part number for MP106 to the following:
5020-8801 CD4.
,_,,,
:
Page 6.22, Table 6.2:
Mj'173 [Option 140J.Therecommendedre~lscementforMP173,ifitneedsto
bekeplaced,isfoundin
CHANGEI
FPage 6-24, Table 6-2:
MP269 through hlPZ72. The recommended
replacements
for MP269 through
MP?72, if they need to be
replaced, are found in
CHANGE 1.
MP302. The recommended
replacement
forMP802,
if it needs to be replaced, ia found in CHANGE 1.
Page 6-32, Table 6-2:
Sll. The recommended
replacement
for Sll, if it fails, is foutid in CHANGE 1
Page 6-33, Table 6-2:
W47. Add the following
part number and description
below W47:
11729.20095 CD4 CABLE ASSEMBLY
(OPTION 140).
Page 7-2, CHANGE D:
Add the following
before "Delete
A9C40":
Change the part number for A9C4-9, A9C13-20 and A9C23-36 to the follo&g:
"
0160.0576 CD5.
Service Sheet BDI:
Replace the portion ofthe Low Pass Filter and Law Noise Amplifier'Circuits
(sght side of service #he&)
with Figure 1.
Figure 1. P/O Low Pass Filter and Low Noise Ampllller Eircults
Advertisement
