Sony BDV-HZ970W Operating Instructions Manual page 49

For the surround amplifier
For the S-AIR receiver
If you use multiple wireless systems, such as
wireless LAN or Bluetooth, the transmission of
S-AIR signals or other wireless signals may be
unstable. In this case, the transmission may be
improved by changing the following [RF
Changel setting.
1
Press HOME.
The home menu appears on the TV screen.
Press <--/-> to select w_ [Setup].
2
3
4
5
6
7
8
Press 4'/4'to select [System Settings],
then press @.
Press ,I,/4, to select [S-AIR Settings],
then press @.
The [S-AIR Settiugsl display appears.
Press ,I,/4, to select [RF Change], then
press @.
Press '1"/4,to select the desired setting,
then press @.
• [Auto]: Normally select this. The system
changes [RF Change] to [Onl or [Offl
automatically.
• [Onl: The system transmits sound by
searching t_r the better channel for
tmnsmitting.
• [Off]: The system transmits sound by
fixing the channel for transmitting.
Press @.
The setting is made.
When you set [RF Change] to [Off],
select the ID so that wireless
transmission is most stable (page 46).
m
• In most cases, you will not need to change this
setting.
If [RF Change] is set to [Off], transmission
between the unit and S-AIR sub unit can be
performed using one ol' the following channels.
S-AIR ID A: equivalent channel for IEEE
802.1 lb/g channel 1
S-AIR ID B: equivalent channel fl)r IEEE
802.1 lb/g channel 6
S-AIR ID C: equivalent channel for IEEE
802.1 lb/g channel 11
• The transmission may be improved by changing the
transmission channel (frequency) of the other
wireless system(s). For details, refer to the operating
instructions ol' the other wireless system(s).
m
X
-,I
1>
€-
n.
o
¢D
<
m.
¢D
49us