Digital Full Color Production Printer
BP-1200S/BP-1200C
Setup Manual
Before using the machine, please read this manual thoroughly. Be sure to keep this manual for future reference.
This manual may not be edited, modified or copied in whole or part without the written consent of the publisher.
■
Parts of this manual is subject to change without prior notice.
■
The screen shots and the illustrations in this manual are used as examples. They may differ from yours depending
■
on the model, the software, or the OS.
Table Of Contents
Power On/Off .................................................................... 1
Safety Notes ...................................................................... 3
Regulation ......................................................................... 5
Environment ...................................................................... 6
Power On/Off
The printer warms up and becomes ready to print within about 7 minutes after powered on.
Switch the power off at the end of a day or if the machine is not used for a long time.
Note
The warm-up time may vary with an initial temperature of the printer.
■
After being inactive for a while, the printer automatically enters the Power Saver mode to reduce power consumption.
■
Powering On
1.
Power on your Print Server to start the Print Server.
For information on functions and operations of the Print
Server, refer to customer documentation supplied with
Print Servers.
2.
Press the switch to power on the Operation PC.
Note
The monitor is automatically turned on in conjunction.
Supplies ............................................................................. 6
Software License ............................................................... 7
3.
Press the power switch on the printer unit to the
upper <
> (ON) position.