Table of Contents
Advertisement
SETUP
Set:
Event
Timer
This function will automatically
turn the Plasma TV on and off, one time only, every day, or once a
week.
If the clock is not set, you can not use this function and the screen below will appear
The message on the screen will disappear after
3 seconds, then the screen automatically goes to the clock setup mode (see page 60).
Use THUMB STICK • to select Event 1, 2, 3 or 4
Use THUMB STICK I_ to change position of On time, Off time, Antenna, Channel, and On/Off Frequency.
Use THUMB STICK A or • to select the time the TV will turn on and off.
Use THUMB STICK A or • to select the day of the week you want the timer to turn on TV.
Use number buttons to set the channel the TV will tune to when it automatically turns on.
Use THUMB STICK ,t or • to select mode Once (TV will turn on/off one time only), Daily (TV will turn on/off at the same time every
day), or Weekly-Sun (TV will turn on/off at same time every week).
Press EXIT to quit the menu.
GAUTION:
Do not use your TV as a deterrent when away from home by using the On and Off Timers
For safety, the TV
should be turned off when you are away from home.
NOTE:
If your TV is ON when an Event is triggered, it wil{ remain ON after the Event has finished.
If your TV is OFF (Stand-by
Mode) when the Event is triggered, it will automatically turn OFF when the Event Timer reaches it's turn OFF time
63
Advertisement
Table of Contents
