Initialization Of Setting - Sony UP-D897 Service Manual

a.
Error [ID
ID Factor
eee
1102h Head cannot be moved from home position to printing position. (During printing)
1103h Head cannot be moved from home position to printing position. (During feeding)
1105h Head cannot be moved from home position to printing position. (During cleaning)
1204h Head cannot be moved from home position to door open position. (During door open)
1301h Head cannot be moved from printing position to home position. (During mechanical initialization)
1302h Head cannot be moved from printing position to home position. (During printing)
1303h Head cannot be moved from printing position to home position. (During feeding)
1305h Head cannot be moved from printing position to home position. (During cleaning)
1401h Head cannot be moved from door open position to home position. (During mechanical initialization)
1404h Head cannot be moved from door open position to home position. (During door open)
2100h Thermistor is shorted. (Abnormally high temperature)
2200h Head is not connected. (Abnormally low temperature)
2300h Preheat time out
2400h Cool down time out
3100h Front paper sensor detects "no paper" during printing.
5100h Print pulse time out
6101h Prestart time out
6102h Paper feed before printing time out
5-9. Initialization of Setting
RESET R:ALL Resets the unit to the factory
setting.
R:FAN Resets the fan ON time.
This is performed when replacing
the fan.
R.H.PRN _ Resets the print count record to "0".
This is performed when the head is
teplaced.
R:MENU Initializes the contents that are set
in the menu.
BACK Returns to RESET.
5-10. Temperature Indication
The current temperature data is displayed.
Example)
TEMP 4H.T:30.5 Head temperature: 30.5 °C
BACK Returns to TEMP.
UP-D&97
5-11. FEED Operation
When the | FEED] button is pressed in the state that the
paper tray is open, the stepping motor is activated and the
platen rotates in the paper eject direction.
5-12. Menu Lock
This is the function to prohibit the change of the setting from
the menu and disable the switching of the front volume. It is
disabled only when the unit is started normally.
Lock/Release Procedure
Turn on the power while pressing the jog dial. After
checking that a beep sound is made after approximately 3
seconds, release the button. When the lock is activated,
"LOCK" is displayed on the LCD and when the lock is
released, "UNLOK" is displayed on the LCD. If the jog
dial or the front volume is operated when the lock is
activated, a "beep" alarm sound is made and "LOCK" is
displayed on the LCD.
5-5