2-4.
Initialization of Print Count History
After replacing the thermal head, perform the initialization of print count history.
* Input i
None
* Set the
switch to.ON while |
pressing ie
and
buttons.
When pressing the jog dial two times,
"SVC" and "PATAN?" are displayed in
order. Rotate the jog dial in this state to
display "RESET" and press the jog dial.
"R:MENU" is displayed and rotate the
jog dial. After displaying the "R:H.PRN",
then press the jog dial.
Check that "RESET" is displayed.
The initialization of print count history is
completed (count becomes "0").
2-4
UP-D897