Troubleshooting Ip On An Sv9100 System; Introduction - NEC UNIVERGE SV9100 System Maintenance Manual

Troubleshooting IP on an SV9100 System

SECTION 1 Introduction
This book provides some helpful tips for troubleshooting IP on the UNIVERGE ® SV9100 system.
SECTION 2 Ping
This is one of the most useful tools available to troubleshoot IP connectivity. PING is a standard component
of Microsoft Windows ® and is also implemented on the UNIVERGE SV9100 IP Phones. Ping sends a
small IP packet to a specified destination and waits for a response back.
It should be possible to ping IP Phones, the GCD-CP10 (CPU), GPZ-IPL (VoIP) and any other devices on the
network. Send a ping and wait for a reply. If a reply is not received, the ping response "times out". This
indicates a connection problem.
Refer to Figure 1-1 Ping Traces on page 1-2
System Maintenance Manual
for examples of these two conditions.
Chapter
1
1