Device Number - Yamaha QX5 Owner's Manual

4. DEVICE NUMBER
45
*Echo Off:
* Echo Direct:
*Echo Rec Monitor:
NOTE
Messages received at MIDI IN are not sent from MIDI
OUT.
Messages received at MIDI IN are sent unchanged from
MIDI OUT. (MIDI OUT acts as MIDI THRU.) However,
received messages are passed through the Key Assign
Table (see note). When an All Note Off message is
received, the Key Assign Table is searched to see if any
notes are still on. If there are, Note Off messages are sent
for each of them.
Messages received at MIDI IN are passed through
Input/Output Assign to be re-channelized or ignored
(p. 41) and through the Status Filters (p. 41, Velocity,
Aftertouch, Pitch Bend, Control Change, System Ex-
clusive). In this way, you can hear exactly what you are
recording.
The QX5 has a 32 note Playback Key Assign Table that keeps track of which
notes are currently on. This means that there can be no more than 32 notes
simultaneously on during playback. Likewise, there is a 16 note Record Key
Assign Table.
This is the "System Exclusive MIDI reception channel" for the QX5 itself. When
incoming Sequence Bulk Data has a matching device number and a sub-status
of 0, 1 or 2, it will be received into QX5 system memory. All other incoming System
Exclusive messages will be recorded as usual. The QX5 itself receives two types
of System Exclusive message; Sequence Bulk data, and Dump Request.
4>DEVICE NUMBER
01
OFF 1-16
ma