Yamaha QX5 Owner's Manual page 30

7. VELOCITY
8. GATE TIME
9. CRESCENDO
10. CREATE
29
Use this to add or subtract a specified value to the velocity of all notes.
7>VELOCITY 143
+20 0005..0020
Velocity offset -99 - +99
if you executed the above example, all notes in measures 5-20 would be played |
somewhat more strongly. However, velocity is limited to 1-127.
Use this to adjust the gate time (how !ong the note is held) for all notes. The original
gate time is multiplied by the number you enter (10%-300% in steps of 5%).
8>GATE TIME 143
120% 000s. . 0020
Gate Time 10%-300%. *
lf you executed the above example, all notes in measures 5-20 would be held
somewhat longer. Gate Time is limited to 16380 clocks.
Use this to gradually change the velocity. Over the measures that you specify, an
increasing number is added to (or subtracted from) the velocity until the velocity
bias you specify is reached on the last measure.
9>CRESCENDO 143
+50 0005. .0020
Final velocity bias ~99 - +99
If you executed the above example, the notes would be played with increasing force
from measure 5, and when the end of measure 20 is reached, the velocity would
be 50 higher than originally recorded. (However, the velocity is limited to 1-127.)
Use this to insert empty measures of a specified time signature. Following measures
are pushed back.
1O>CREATE 143
4/4 0003.. 0005 |
Time signature 1/4 - 32/16
If you executed the example above, the track would change as follows.