Table of Contents
Advertisement
(4) Clean the ECG cable regularly.
(a) Wipe off any stains using a soft cloth moistened with mild detergent and then
tightly wrung out. When the mild detergent is required for cleaning, please
contact your TOSHIBA representative.
(b) Wipe the ECG cable with dry cloth and dry it well.
CAUTION:
(5) Cleaning the CRT monitor
Wipe the monitor using a soft cloth moistened with glass cleaner and then tightly
wrung out.
CAUTION:
Do not use hydrocarbon glass cleaner or cleaner for the OA
equipment to clean the monitor. This substance may cause
deterioration in the monitor.
1. Do not allow clips to wet. The ECG is not displayed
correctly.
2. Do not soak the connector in the water.
Wipe the connector with dry cloth only.
The water may enter the connector inside, possibly
resulting in failure.
3. Do not use solvents (such as paint thinner, benzine, or
alcohol) for cleaning the ECG cable.
No. 2B730-973EN*D
21-2
Advertisement
Table of Contents
