Table of Contents
Advertisement
13.1 Display Procedures
(1) Turn OFF the power of the system and connect the pick-up cable etc. to the side
panel.
(2) Turn ON the power of the system.
(3) Attach the ECG electrodes to the patient.
(4) Set the mode to M mode in which reference signals can be displayed.
* If the signals need to be displayed in B-mode and B dual mode, it is necessary to
preset the display setting to ON.
13.2 Adjustment of Reference Signals
(1) Adjustment of the ECG waveform
Use the ECG dial on the side panel to adjust the ECG waveform.
• GAIN: Adjusts the sensitivity.
• POSI: Adjusts the display position.
(2) Adjustment using the menu
When [ECG] is selected from the [Other] menu, the following menu is displayed.
The settings can be changed using the trackball and
ECG
Sync Mod
Sync+Real
CH1
Delay
Interval
Sets ECG synchronization mode.
Displays ECG-gating images and live images simultaneously
(for dual-display mode).
Performs ECG-gating at the delay time set.
Sets the delay time from detection of the R wave to
refereshing of the B screen.
Sets the interval before the B screen is updated in internal
gating mode.
No. 2B730-973EN*D
13-2
.
SET
*
Advertisement
Table of Contents
