Multiple Inp Installations - HP 3000 Series Installation And Service Manual

2-10. MULTIPLE INP INSTALLATIONS
For additional data communication capability, more than one INP
can be installed in the same HP 3000 Series 30 or
Seri~s
33
Computer System. The maximum number of INPs thai; one HP 3000/33
can accommoda te is seven. A maximum of two INPs can be installed
in each HP 3000/30. .
After the first INP has been installed, subsequent INPs are in-
stalled by following the same procedures as outlined in the pre-
vious paragraphs in this section. Any available card slot within
the specified range can be used, since the device sequence is
determined by the setting of each INP's HP-IB address switch
rather than by the card slot it occupies.
When multiple INPs are installed in an HP 3000/33, no more than
three INPs can be located in the first card cage. The fourth
through seventh INPs must be located in the second card cage.
2-14