Sony DVP-S300 Operating Instructions Manual page 7

What cordswill I heed?
Audio/Video connecting cord (supplied) (1)
White (L) White (L)
Red (R) Red (R)
S-link S-link
Hookups
When connecting the cords, be sure to match the color-
coded cord to the
appropriate
jacks on the components:
Yellow (video) to Yellow, Red (right) to Red and White
(left) to White. Be sure to make connections firmly to
avoid hum and noise.
1To listen to the sound through TV speakers
TV
CD/DVD player INPUT
_'--R_AUOlO 1-L Vl _"_-_ ,_ VIDEO
IITo listen to the soundthrough speakersconnected to
an amplifier
TV
CD/DVD player ' INPUT
I g.AO_O1--L _aOEOq
®®@1
R-AU_ _o_021 - AUO_O
! _EOUT J _"_R
* Make the same connections when your amplifier conforms
to "Pro Logic."
Notes
" D° n°t connect this I [ _-_
player to a video deck. Video deck
I *
on your TV after
making the connections j
shown on the right, a CD/DVD
player nect
picture noise may
tl
directly
appear.
Depending on the TV or amplifier, sound distortion may
occur because the audio output level is high. In this case,
set "AUDIO ATT" in "INITIAL SETUP 2" to "ON" in the
setup display. For details, see page 35.
"_°lf your TV has an S video input connector
Connect the component via the S VIDEO OUT connector
using the S video cable (supplied) instead of the video
connecting cord, You will get a better picture.
S video cable (supplied)
CDIDVD player TV
"_°lf you have a digital component suchas an amplifier
with a digital connector, DAT or MD
Connect the component v ia the DIGITAL OUT OPTR_J_L
or COAXIAL connector using an optical or coaxial digital
connecting cord (not supplied).
When you play a OVO, set "DIGITAL OUT" in _INITIAL
SETUP 2" to "PCM"in the setup display. (page 35)
==When usinganopticaldigitalconnectiong cord
Optical digital connectiong cord
(not supplied)
Take off the cap and plug in the optical digital
connectiong cord.
CD/DVD player
Amplifier with a
digital connector, MD
deck, DAT deck, etc.
]
(Continued)