Sony DVP-S300 Operating Instructions Manual page 15

"_° When "RESUME" appears on
the front panel display
Youcanresumeplayback
from the point where you
stopped the CD/VIDEO CD
(page 25).
To play from the beginning
of the disc, see page 25.
°_÷ What is a track?
Seepage 5.
"_1 What is an index?
See page 5.
"_° What isa scene?
Seepage 5.
V
If youwant tochange the
search mode
Press SEARCH MODE. Each
timeyou press incaseofa
VIDEO
CD,
"SCENE
SEARCH," "TRACK
SEARCH" and "V (video).
INDEX SEARCH" appear on
the TV screen. In case of a
CD, only "TRACK
SEARCH" appears.
If you want to change the
search speed
Two speeds are available:
FFII_I_ or FR1,4_ (about 10
times the normal speed) and
FF21_II* or FR2_I4 (about 30
times).
Each time you press @9 or _,
the indication
changes as
follows:
FFII_I_ (FRI,_I)
FF21_I_ (FR24111)
Note
Some discs do not allow you to
start playing from a particular
scene. In this case, if you do
Scene Search before
you
start
playing, the player starts playing
from scene 1. If you do Scene
Search while playing a disc, the
player starts playing from the
>1111
Number buttons--
SEARCH
MODE
II1_ --
I'_1_1/I_H --
>--
II
ENTER
k J--
CLEAR
ENTER
Jl_
ii
To Press
Stop •
Pause
II
Play frame by frame II or >
Resume play after pause liD"
Go to the next trackin
_i
Continuous Play mode
Go back to the preceding
track in Continuous Play
mode
Play in slow motion |_"
Select the track 1 SEARCH MODE repeatedly until "TRACK
SEARCH" appears on the TV screen.
2 Number buttons to select the track number,
then ENTER or [_-.
Select the scene before you start
playing a VIDEO CD with PBC
functions and during PBC playback
(Scene Search)
Locate a point while monitoring
the picture (Scan)
Stop play and remove the disc A
1 SEARCH MODE repeatedly until "SCENE
SEARCH" appears on the TV screen.
2 Number buttons to select the scene number,
then ENTER or 13>. (To check the current scene
number, press DISPLAY. The scene number
appears at the left top of the TV screen.)
t_/_. You will not hear the sound during this
operation. When you find the point you want,
press _ to return to the normal speed.
If youhavemade a mistakewhenyoupressthe numberbutton
Press CLEAR, then the correct number button.